P664.E (02/13)1
pulseelectronics.com
SMT Power Inductors
Power Beads - PA2202.XXXNL Series
Current Rating: Over 75Apk
Inductance Range: 120nH to 360nH
Height: 6.0mm Max
Footprint: 12.1mm x 10.0mm Max
NOTES:
1. The rated current as listed is either the saturation current or the heating current depending on
which value is lower.
2. The nominal DCR is measured from point a to point b , as shown below on the mechanical
drawing.
3. The saturation current is the typical current which causes the inductance to drop by 20% at the
stated ambient temperatures (25°C and 100°C). Inductance at Isat is the minimum inductance
when measured at Isat (25°C and 100°C).This current is determined by placing the component in
the specified ambient environment and applying a short duration pulse current (to eliminate self-
heating effects) to the component.
4. The heating current is the DC current which causes the part temperature to increase by
approximately 40°C. This current is determined by soldering the component on a typical
application PCB, and then applying the current to the device for 30 minutes.
5. In high volt*time applications, additional heating in the component can occur due to core losses
in the inductor which may neccessitate derating the current in order to limit the temperature rise
of the component. To determine the approximate total losses (or temperature rise) for a given
application, the coreloss and temperature rise curves can be used.
6. Optional Tape & Reel packaging can be ordered by adding a “T” suffix to the part number
(i.e. PA2202.121NL becomes PA2202.121NLT). Pulse complies to industry standard tape and reel
specification EIA481.
7. The temperature of the component (ambient plus temperature rise) must be within the stated
operating temperature range.
Dimensions: Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
Weight ....................2.7 grams
Tape & Reel .................600/reel
Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C
7
Part
Number
Inductance
@0ADC
(nH ±15%)
Inductance
@Irated
(nH TYP)
Irated
1
(ADC)
DCR
2
(mΩ)
Inductance
@Isat
(nH TYP)
Inductance
@Isat
(nH MIN)
Saturation Current
3
(A TYP)
Heating
4
Current
(A TYP)
25°C 100°C
PA2202.121NL 120 120 36
0.48 ± 6.5%
96 78 84 75
36
PA2202.181NL 180 180 36 144 117 64 52
PA2202.211NL 215 215 36 172 140 53 47
PA2202.231NL 230 230 36 184 150 47 44
PA2202.321NL 325 282 31 260 211 34 31
PA2202.361NL 365 315 27 292 237 30 27
Mechanical
PA2202.XXXNL
Schematic