REVISION A 06/06/16 5 2:4 3.3V PCIE CLOCK MUX
9DML04 DATASHEET
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the 9DML04. These ratings, which are standard values
for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these or any other conditions
above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating
conditions for extended periods can affect product reliability. Electrical parameters are guaranteed only over the recommended
operating temperature range.
Electrical Characteristics–Clock Input Parameters
Electrical Characteristics–Current Consumption
PARAMETER SYMBOL CONDITIONS
MIN TYP MAX
UNITS NOTES
Supply Voltage VDDx 4.6 V 1,2
Input Voltage V
IN
D
+0.5 V 1,3
Input High Voltage, SMBus V
IHSMB
SMBus clock and data pins 3.9 V 1
Storage Temperature Ts -65 150 °C 1
Junction Temperature Tj 125 °C 1
Input ESD protection
ESD prot Human Body Model 2500 V 1
1
Guaranteed by design and characterization, not 100% tested in production.
2
Operation under these conditions is neither implied nor guaranteed.
3
Not to exceed 4.6V.
TA = T
AMB,
Supply Voltages per normal operation conditions, See Test Loads for Loading Conditions
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS NOTES
Input Common Mode
Voltage - DIF_IN
V
COM
Common Mode Input Voltage 150 900 mV 1
Input Swing - DIF_IN V
SWING
Differential value 300 mV 1
Input Slew Rate - DIF_IN dv/dt Measured differentially 0.4 8 V/ns 1,2
Input Leakage Current I
IN
IN
DD ,
IN
GND -5 5 uA
Input Duty Cycle d
tin
Measurement from differential wavefrom 45 55 % 1
Input Jitter - Cycle to Cycle J
DIFIn
Differential Measurement 0 125 ps 1
1
Guaranteed by design and characterization, not 100% tested in production.
2
Slew rate measured through +/-75mV window centered around differential zero
TA = T
AMB,
Supply Voltages per normal operation conditions, See Test Loads for Loading Conditions
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS NOTES
Operating Supply Current
I
D
VDD, All outputs active @100MHz
23 30
mA
Powerdown Current
I
DDPD
VDD, all outputs disabled 1.6 2.5 mA
1
1
Input clock stopped.