HDMI over Cat5/Cat6 Active Extender, Box-Style
Remote Repeater for Video and Audio, 1080p
@60Hz up to 125-ft., TAA
MODEL NUMBER: B126-110
Works with Tripp Lite’s B126-Series transmitters and receivers to extend an HDMI signal via Cat5e/6
cable to multiple projectors, monitors or televisions in a chain. Ideal for digital signs and trade show
presentations.
Description
The B126-110 HDMI over Cat5/Cat6 Active Remote Repeater works with Tripp Lite B126-Series
transmitters and receivers to extend an HDMI signal to multiple projectors, monitors or televisions in a
chain. It’s ideal for digital signs, trade shows, presentations, classrooms, churches, retail settings and
other applications where the video source is located farther than conventional cables allow or that require
multiple displays connected to one source.
The repeater uses HDMI cable (see Tripp Lite’s P568-Series) to connect to the local monitor and Cat5e/6
cable to transmit to the receiver and/or other remote repeaters in the chain (for best results, use 24 AWG
solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series).
The B126-110 can extend a 1080i (60 Hz) signal up to 175 feet, a 1080p (60 Hz) signal up to 125 feet and
a 3D signal up to 100 feet. You can connect up to three B126-110 units in the chain for a total of four
HDMI displays and full signal extension of 700 feet (1080i), 500 feet (1080p) or 400 feet (3D).
In addition to crystal-clear video, the B126-110 delivers full, rich stereo and 7.1-channel surround sound
(multi-channel or PCM) audio when used with a B126-Series transmitter. Built-in equalization control lets
you fine-tune the image quality at each remote display. Supports 24-bit True Color (8 bits per channel)
and HDCP compatibility. Easy to set up with no software or drivers to install. Mounts to a wall, rack or pole
using the included hardware.
Features
Highlights
Extends 1080i (60 Hz) signal up
to 175 ft.
●
Connect up to 3 units in a chain
for maximum extension
●
Supports high-definition video
resolutions up to 1080p (60 Hz)
●
Supports stereo and 7.1-
channel surround sound audio
●
Plug and play—no software or
drivers to install
●
System Requirements
HDMI video source and displays
●
For international use, a power
supply with the appropriate plug
type must be purchased
separately.
●
Package Includes
B126-110 HDMI over Cat5/Cat6
Active Remote Repeater
●
Screwdriver for adjusting
equalization
●
External Power Supply with
NEMA 1-15P Plug(Input:
100–240V, 50/60 Hz, 0.5A;
Output: 5V, 2A)
●
Mounting hardware
●
Owner’s Manual
●
1 / 3