OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

PS40-102G-PWR

P1-P3P4-P4
1
3
4
2
PRESSURE SWITCHES
PS40
1
2
3
4
Part name Material
Pressure port
Housing
“O” ring
Port block
POM (Polyoxymethylene)
PC (Polycarbonate)
Fluoro-rubber
LCP (Liquid crystal polymer)
INTERNAL STRUCTURE (M5 female screw)
OCompatible with non-corrosive gases
O
Solidstate pressure switch with no mechanical moving parts
O2 types of pressure ports are available
OOpen collector output of either NPN or PNP is available
OAnalog output type available
■
FEATURES
■
MODEL NUMBER DESIGNATION
P S 4 0 - 1 0 2 G - N A R
Series name
Rated pressure range
501：0 ~ 50 kPa
102：0 ~ 100 kPa
103：0 ~ 1000 kPa
Pressure reference
G：Gauge
V：Gauge (Vacuum)
Switch output interface
N：NPN open collector
P：PNP open collector
Pressure port
Outputs
A：1 switch output with adjustable hysteresis
and analog output
W：2 switch output
R：R 1/8 male screw
M：M 5 female screw
■
LIST OF MODEL NUMBERS
Pressure port
R 1/8 male
screw
M 5 female
screw
Outputs
Adjustable hysteresis switch output + Analog output
NPN open collector output
PNP open collector output
NPN open collector output
PNP open collector output
NPN open collector output
PNP open collector output
NPN open collector output
PNP open collector output
2 points switch output
Adjustable hysteresis switch output + Analog output
2 points switch output
Switch output
   102V  501G  102G   103G
−100 kPa 50 kPa 100 kPa 1000 kPa
PS40-102V-NAR PS40-501G-NAR PS40-102G-NAR PS40-103G-NAR
PS40-102V-PAR PS40-102G-PAR PS40-103G-PAR
PS40-102V-NWR PS40-501G-NWR PS40-102G-NWR PS40-103G-NWR
PS40-102V-PWR PS40-102G-PWR PS40-103G-PWR
PS40-102V-NAM PS40-501G-NAM PS40-102G-NAM PS40-103G-NAM
PS40-102V-PAM PS40-102G-PAM PS40-103G-PAM
PS40-102V-NWM PS40-501G-NWM PS40-102G-NWM PS40-103G-NWM
PS40-102V-PWM PS40-102G-PWM PS40-103G-PWM
: Not available
K Verify the above model numbers when placing orders.
PS40
PRESSURE SWITCHES
General specifications
Power
■
STANDARD SPECIFICATIONS
Item
Pressure reference
Rated pressure range
Maximum pressure
Break-down pressure
Operating temp. range
Compensated temp. range
Storage temp.
Operating humidity
Supply voltage
Pressure medium
Insulation resistance
Dielectric strength
Pressure port
Net weight
Model number 102V 501G 102G 103G
Gauge
− 100 50 100 1000
200 100 200 1500
500 250 500 2000
Non-corrosive gases
Approx. 50
10.8 ~ 30 V
（
Including ripple percentage
）
100 (500 V DC)
500 V AC, 60 s
（
Leakage current 1 mA maximum
）
R 1/8
（
M5 Female screw
）
or
“O” ring groove
（
M5 Female screw
）
0 ~ 50
35 ~ 85
（
No condensation
）
− 20 ~ 80
− 20 ~ 70
kPa
kPa
kPa
°C
°C
%RH
°C
V DC
MΩ
minimum
g
Consumption current 17 mA
（
Only W type 25 mA maximum
）
maximum
Output interface
Setting method
Adjustable range
Display
No. of outputs 1 or 2
Open collector output (NPN or PNP)
Adjustable by VR
Zero through rated pressure minimum
Red LED ON (W type only : SW1 Red, SW2 Green)
Switch output
Analog output
Accuracy
0 ~ 50 °C
(Reference temp.: 25 °C)
Hysteresis
% F.S.
Switching capacity
Residual voltage
Response
Output voltage
Zero voltage
Span voltage
Output current
30 V 80 mA
0.8 (NPN), 1.2 (PNP)
Approx. 1
1 ~ 5
1 ± 0.1
4 ± 0.1
1
（
Load resistance 5 kΩ minimum
）
V
maximum
ms
V
V
V
mA
maximum
± 3
Approx. 1 ~ 15 % of the set value (W type only 2 % F.S. maximum)
OUnless otherwise specified, the specs are defined at an ambient temperature of 25±5 °C and excitation voltage of 12 V DC.
2 – 3.3
Through hole
Polycarbonate
22.4
R 1/8
3.1
24.8 ± 0.3
2 ± 0.3
11
2 – 3.3
Through hole
4-core shielded cable
L = 1500 ± 50
Indicator LED1 (Red)
Polyacetal
M 5 depth 5
Pressure port
8.5 ± 0.3
4.5
45 ± 0.515
AWG 26 ULNo.2844
Indicator LED 2 (Green)
※In case of 2 switch outputs
()
Label
Pressure setting VR
※No.1 switch setting in case of 2 switch outputs
Hysteresis adjustment VR
※No.2 switch setting in case of 2 switch outputs
φ
( 3.8)
φ
φ
Label
M 5 depth 5
Pressure port
2 – M 3 depth 4.5
10 13
8
15
2 – 3.3
Through hole
Through hole
Polycarbonate
22.4
3.1
19
24.8 ± 0.3
12
2 ± 0.3
11
2 – 3.3
Pressure setting VR
※No.1 switch setting in case of 2 switch outputs
Hysteresis adjustment VR
※No.2 switch setting in case of 2 switch outputs
Indicator LED1 (Red)
Polyacetal
4.5
45 ± 0.5
Indicator LED 2 (Green)
※In case of 2 switch outputs
(
)
φ
φ
φ
φ
4-core shielded cable
L = 1500 ± 50
AWG 26 ULNo.2844
( 3.8)
φ
PS40
PRESSURE SWITCHES
■
OUTLINE DIMENSIONS Unless otherwise specified, tolerance : ± 0.5 (Unit: mm)
ONAR, PAR, NWR, PWR
ONAM, PAM, NWM, PWM
■
ENVIRONMENTAL CHARACTERISTICS
Test item Test conditions (At 25 ± 5 °C) Permissible change
Vibration 10 ~ 500 Hz, 1.5 mm maximum/98.1 m/s
2
, 3 directions for 2 hours each
490 m/s
2
, 3 directions for 3 times each
0~Rated pressure, 10
6
cycles
40 °C, 90 ~ 95 %RH, 240 hrs.
Switch output setting and analog output
(Zero voltage/span voltage): ± 2 %F.S.
maximum, each
Shock
Pressure cycling
Moisture resistance
P1-P3P4-P4

PS40-102G-PWR

Mfr. #:
Buy PS40-102G-PWR
Manufacturer:
Description:
Pressure Switches PS40-102G-PWR
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet