UPC2771TB
OUTLINE DIMENSIONS
(Units in mm)
UPC2771TB
PACKAGE OUTLINE S06
LEAD CONNECTIONS
C2H
1. INPUT
2. GND
3. GND
4. OUTPUT
5. GND
6. VCC
(Top View) (Bottom View)
PART NUMBER QTY
UPC2771TB-E3 3K/Reel
ORDERING INFORMATION
Note: Embossed Tape, 8 mm wide. Pins 1, 2 and 3 face perforated
side of tape.
+0.1
-0
DOT ON
BACK SIDE
+0.1
-0.5
0~0.1
0.2
0.15
1
2
3
4
5
6
0.65
1.3
2.0±0.2
0.65
2.1±0.1
1.25±0.1
0.9 ± 0.1
0.7
Pin Pin Applied Description Internal
No. Name Voltage Equivalent
(V) Circuit
1 Input — Signal input pin. An internal matching circuit, configured
with resistors, enables 50 Ω connection over a wide
bandwidth. A multi-feedback circuit is designed to cancel
the deviations of hFE and resistance. This pin must be
coupled to the signal source with a blocking capacitor.
4 Output Signal output pin. Connect an inductor between this pin
and VCC to supply current to the internal output transistors.
6 VCC 2.7 to 3.3 Power supply pin. This pin should be externally equipped
with a bypass capacitor to minimize ground impedance.
2 GND 0 Ground pins. These pins should be connected to system
ground with minimum inductance. Ground pattern on the
board should be formed as wide as possible. All the ground
pins must be connected together with wide ground pattern
to minimize impedance difference.
1
3
2
5
4
6
PIN DESCRIPTION
EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS
CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279
24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM
PRINTED IN USA ON RECYCLED PAPER -12/97
DATA SUBJECT TO CHANGE WITHOUT NOTICE
