MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Precision
www.vishay.com
Vishay Beyschlag
Revision: 12-Feb-16
2
Document Number: 28767
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
APPLICATION INFORMATION
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow
support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is
not exceeded. Furthermore, a high level of ambient temperature or of power dissipation may raise the temperature of the solder
joint, hence special solder alloys or board materials may be required to maintain the reliability of the assembly.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime. The designer may estimate the performance of the particular resistor application or set certain load and
temperature limits in order to maintain a desired stability.
Notes
• Radial version (RB, UB) cannot be qualified according to CECC so these can only be ordered with variant N or S.
(1)
Approval is according to EN 140101-806, version A.
MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION
Operation mode Precision Standard
Climatic category -10 °C / +85 °C / 56 days -55 °C / +125 °C / 56 days
Rated dissipation, P
70
MBA/SMA 0204 0.07 W 0.25 W
MBB/SMA 0207 0.11 W 0.40 W
MBE/SMA 0414 0.17 W 0.65 W
Applied maximum film temperature,
F max.
85 °C 125 °C
Max. resistance change at rated
dissipation |R/R max.|, after:
MBA/SMA 0204 100 to 100 k 100 to 100 k
1000 h 0.05 % 0.25 %
8000 h 0.1 % 0.5 %
225 000 h 0.3 % 1.5 %
MBB/SMA 0207 100 to 270 k 100 to 270 k
1000 h 0.03 % 0.15 %
8000 h 0.1 % 0.5 %
225 000 h 0.3 % 1.5 %
MBE/SMA 0414 100 to 470 k 100 to 470 k
1000 h 0.05 % 0.25 %
8000 h 0.1 % 0.5 %
225 000 h 0.3 % 1.5 %
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
TYPE TCR TOLERANCE RESISTANCE
(1)
E-SERIES
MBA/SMA 0204
± 25 ppm/K
± 0.25 % 22 to 332 k E96; E192
± 0.1 % 43 to 332 k E96; E192
± 15 ppm/K
± 0.25 % 22 to 221 k E96; E192
± 0.1 % 43 to 221 k E96; E192
MBB/SMA 0207
± 25 ppm/K
± 0.25 % 10 to 1 M E96; E192
± 0.1 % 10 to 1 M E96; E192
± 15 ppm/K
± 0.25 % 10 to 1 M E96; E192
± 0.1 % 10 to 1 M E96; E192
MBE/SMA 0414
± 25 ppm/K
± 0.25 % 22 to 1.5 M E96; E192
± 0.1 % 43 to 1 M E96; E192
± 15 ppm/K
± 0.25 % 22 to 1 M E96; E192
± 0.1 % 43 to 1 M E96; E192