MDF14A-10P-2.5DS(05) Datasheet MDF14A-10P-2.5DS(05) | P1-P3

B166

2.5mm Pitch Board to Board Vertical Post Header

MDF14A Series

■Features

1. Service Efficiency Up contact and contact.

The post header is developed in the special design capable

of vertically connecting the board unnecessary for insertion

or extraction.

The post header can be connected in combination of the

receptacle with the plug at low cost.

2. Current Capacity [5A]

By adopting the 0.8mm round pin as the post pin, the pin

strength can be enhanced as well as the current capacity

can be maintained at 5A approximately.

3. Board Pre-fixed Mechanism

The kink process is provided for the board pre-fix process.

4. Pin Extraction Specification

The post header corresponds to individual pin extraction

specifications.

■Applications

Various power supply units, and secondary power unit for

the set

Kink process

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

B167

MDF14A Series●2.5mm Pitch Board to Board Vertical Post Header

Note 1: Includes temperature rise caused by current flow.

Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and

Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.

Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a

specific part number shown.

Note: Hirose's tin plating process takes measures against whisker.

■Material

Product Part Material Finish Remarks

Pin Header

Insulator Polyamide Beige UL94V-0

Contact Brass Tin plated

________

■Ordering Information

MDF14A -

P - 2.5 DS

((0055))

qewrt

r Contact pitch: 2.5mm

t Connection Type

DS : Right Angle

Contact Surface Finish / Packaging Type

(05) : Tin plated, 100 pcs. per bag

q Series Name : MDF 14A

w Number of contacts: 4 to 10

e Connector Type

P : Pin Header

●Connector

■Product Specifications

Current rating : 5A

Operating Temperature Range

: -30 to +85ç (Note 1)

Storage Temperature Range

: -10 to +60ç(Note 2)

Voltage rating :

250V AC

Operating Moisture Range

: 40 to 80%

Storage Moisture Range

: 40 to 70% (Note 2)

Rating

Item Specification Condition

1. Insulation Resistance 1000M ohms min. 500V DC

2. Withstanding voltage No flashover or insulation breakdown. 1500V AC/1 minute

3. Vibration No damage, cracks, or parts looseness.

Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.

Humidity (Steady state)

Insulation resistance: 1000M

ohms

min.

96 hours at temperature of 40 ± 2ç and humidity of 90% to 95%

5. Temperature Cycle No damage, cracks, or parts looseness.

(-55ç: 30 minutes→5 to 35ç: 10 minutes max.→

(-85ç: 30 minutes→5 to 35ç: 10 minutes max.) 5 cycles

Resistance to Soldering heat

No deformation of components affecting performance.

Flow: 260ç for 10 seconds

Manual soldering: 350ç for 3 seconds

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

B168

MDF14A Series●2.5mm Pitch Board to Board Vertical Post Header

■Pin Header

●Applicable Through-hole Diameter :

Ø1.0

+0.1

BApplication Pattern

Part Number CL No.

Number of Contacts

A B RoHS

MDF14A- 4P-2.5DS

(05)

547-0242-4-

4 10.0 7.5

MDF14A- 5P-2.5DS

(05)

547-0241-1-

5 12.5 10.0

MDF14A- 6P-2.5DS

(05)

547-0240-9-

6 15.0 12.5

MDF14A- 7P-2.5DS

(05)

547-0239-0-

7 17.5 15.0 YES

MDF14A- 8P-2.5DS

(05)

547-0238-7-

8 20.0 17.5

MDF14A- 9P-2.5DS

(05)

547-0237-4-

9 22.5 20.0

MDF14A-10P-2.5DS

(05)

547-0236-1-

10 25.0 22.5

Note: A packaging quantity is delivered by the bag unit (100 pcs.). If needed,

please order the products per bag.

Note:The kink process is alternately performed in

optional directions.

Unit: mm

[Specific No.]

–

* *,

(* *)

(05) :

Tin plated, 100 pcs. per bag

BPrecautions

1. Recommended Soldering Condition

Flow: 255±5ç for 10 seconds max.

Manual soldering: 340±10ç for 3 seconds

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

P1-P3

MDF14A-10P-2.5DS(05)

Mfr. #:

Buy MDF14A-10P-2.5DS(05)

Manufacturer:

Hirose Electric

Description:

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

MDF14A-10P-2.5DS(05)