7SB3125
http://onsemi.com
2
Table 1. MAXIMUM RATINGS
Symbol Parameter Value Unit
V
CC
DC Supply Voltage −0.5 to +7.0 V
V
IN
Control Pin Input Voltage −0.5 to +7.0 V
V
I/O
Switch Input / Output Voltage −0.5 to +7.0 V
I
IK
Control Pin DC Input Diode Current V
IN
< GND −50 mA
I
OK
Switch I/O Port DC Diode Current V
I/O
< GND −50 mA
I
O
On−State Switch Current ±128 mA
Continuous Current Through V
CC
or GND ±150 mA
I
CC
DC Supply Current per Supply Pin ±150 mA
I
GND
DC Ground Current per Ground Pin ±150 mA
T
STG
Storage Temperature Range −65 to +150 °C
T
L
Lead Temperature, 1 mm from Case for 10 Seconds 260 °C
T
J
Junction Temperature Under Bias 150 °C
q
JA
Thermal Resistance SC70−5/SC−88A (Note 1)
TSOP−5
ULLGA6/UDFN6
350
230
496
°C/W
P
D
Power Dissipation in Still Air at 85°C SC70−5/SC−88A (Note 1)
TSOP−5
ULLGA6/UDFN6
150
200
252
mW
MSL Moisture Sensitivity Level 1
F
R
Flammability Rating Oxygen Index: 28 to 34 UL 94 V−0 @ 0.125 in
V
ESD
ESD Withstand Voltage Human Body Mode (Note 2)
Machine Mode (Note 3)
Charged Device Mode (Note 4)
>2000
>200
N/A
V
I
LATCHUP
Latchup Performance Above V
CC
and Below GND at 85°C (Note 5) ±100 mA
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Measured with minimum pad spacing on an FR4 board, using 10 mm−by−1 inch, 2 ounce copper trace no air flow.
2. Tested to EIA/ JESD22−A114−A
3. Tested to EIA/ JESD22−A115−A
4. Tested to JESD22−C101−A
5. Tested to EIA / JESD78.
Table 2. RECOMMENDED OPERATING CONDITIONS
Symbol Parameter Min Max Unit
V
CC
Positive DC Supply Voltage 4.0 5.5 V
V
I
Control Pin Input Voltage 0 5.5 V
V
I/O
Switch Input / Output Voltage 0 5.5 V
T
A
Operating Free−Air Temperature −55 +125 °C
Dt / DV
Input Transition Rise or Fall Rate Control Input
Switch I/O
0
0
5
DC
nS/V