OMO ElectronicOMO Electronic
Expand menu
0 Cart

FS-9003

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27P28-P30P31-P33P34-P36P37-P39P40-P42P43-P45P46-P48P49-P51P52-P54P55-P57P58-P60P61-P63P64-P66P67-P69P70-P72P73-P75P76-P78P79-P81P82-P84P85-P87P88-P89
JTAG-Booster for Intel XScale
JTAG_XScaleb.doc 7
1.3. Contents of Distribution Disk
•
JTAG250.EXE
JTAG250.OVL
Tool for Intel PXA210/250
•
JTAG250.INI Template configuration file for Intel PXA210/250. See
chapter 1.11 "Initialization file JTAGxxx.INI"
•
JTAG255.EXE
JTAG255.OVL
Tool for Intel PXA255/26x
•
JTAG255.INI Template configuration file for Intel PXA255/26x. See
chapter 1.11 "Initialization file JTAGxxx.INI"
•
JTAG321.EXE
JTAG321.OVL
Tool for Intel IOP321
•
JTAG321.INI Template configuration file for Intel IOP321. See
chapter 1.11 "Initialization file JTAGxxx.INI"
•
JTAG425.EXE
JTAG425.OVL
Tool for Intel IXP425
•
JTAG425.INI Template configuration file for Intel IXP425. See
chapter 1.11 "Initialization file JTAGxxx.INI"
•
HEX2BIN.EXE Converter program to convert Intel HEX and Motorola
S-Record files to binary. See chapter 4 "Converter
Program HEX2BIN.EXE"
•
WinNT.zip Support for Windows NT and Windows 2000. See
chapter 5 "Support for Windows NT, Windows 2000"
•
JTAG_V4xx_FLAS
HES.pdf
List of all supported Flash devices
•
README.txt Release notes, new features, known problems
JTAG-Booster for Intel XScale
8 JTAG_XScaleb.doc
1.4. Connecting your PC to the target system
The JTAG-Booster can be plugged into standard parallel ports (LPT1-3) with a
DB25-Connector.
Module Élan486
LPT1-3
Élan
SC400
11
The target end of the cable has the following reference:
12*34567 8
TCK GND TMS TRST# NC TDI TDO +3.3V
*PIN 2 can be detected by the thick cable.
To connect your design to the JTAG-BOOSTER you need a single row berg
connector with a spacing of 2.54mm on your PCB. The names refer to the
target: Pin 7 is the target’s TDO pin and is an input on the JTAG-Booster’s side.
The 3.3V version of the JTAG-Booster (FS part number 285) is delivered
together with this package. Don’t use the 5V version of the JTAG-Booster (FS
part number 227) with a 3.3V target. Don’t apply 5V to the 3.3V version of the
JTAG-Booster!
Your target must be able to power the JTAG-Booster, it draws about 100mA.
Before you start the program, the JTAG-BOOSTER must be plugged to a
parallel interface of your PC and to the 8 pin JTAG connector on the target.
JTAG-Booster for Intel XScale
JTAG_XScaleb.doc 9
The utility is started with the general command line format: JTAGxxx
JTAGxxx /function [filename] [/option_1] ... [/option_n].
Note that the function must be the first argument followed (if needed) by the
filename.
If you want to cancel execution of JTAGxxx, press CTRL-Break-Key.
On any error the program aborts with an MSDOS error level of one.
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27P28-P30P31-P33P34-P36P37-P39P40-P42P43-P45P46-P48P49-P51P52-P54P55-P57P58-P60P61-P63P64-P66P67-P69P70-P72P73-P75P76-P78P79-P81P82-P84P85-P87P88-P89

FS-9003

Mfr. #:
Buy FS-9003
Manufacturer:
Digi International
Description:
Development Boards & Kits - ARM JTAG Booster PC Intel 386EX 3.3V
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet