OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ISL59111IIZ-T7

P1-P3P4-P6P7-P9P10-P10
1
®
FN6172.4
ISL59111
8MHz Rail-to-Rail Composite Video Driver
The ISL59111 is a single rail-to-rail 3-pole output
reconstruction filter with a -3dB roll-off frequency of 8MHz
and a slew rate of 40V/µs, with input signal DC restoration
accomplished with an internal sync tip clamp. Operating
from single supplies ranging from +2.5V to +3.6V and
sinking an ultra-low 2mA quiescent current, the ISL59111 is
ideally suited for low power, battery-operated applications. It
also features inputs capable of reaching down to 0.15V
below the negative rail. Additionally, an enable high pin shuts
the part down in under 14ns.
The ISL59111 is designed to meet the needs for very low
power and bandwidth required in battery-operated
communication, instrumentation, and modern industrial
applications such as video on demand, cable set-top boxes,
DVD players, and HDTV. The ISL59111 is offered in a
space-saving CSP package guaranteed to a 0.7mm
maximum height constraint and specified for operation from
-40°C to +85°C temperature range.
Features
• 3rd order 8MHz reconstruction filter
• 40V/µs slew rate
• Low supply current = 2mA
• Power-down current less than 3µA
• Supplies from 2.5V to 3.6V
• Rail-to-rail output
• Input to 0.15V below V
S
-
• Input sync tip clamp
• SAG correction reduces AC coupling capacitor size
• Pb-free plus anneal available (RoHS compliant)
Applications
• Video amplifiers
• Portable and handheld products
• Communications devices
• Video on demand
• Cable set-top boxes
• Satellite set-top boxes
• DVD players
• HDTV
• Personal video recorders
Ordering Information
PART
NUMBER
(See Note)
PART
MARKING
TAPE &
REEL
PACKAGE
(Pb-Free)
PKG.
DWG. #
ISL59111IZ-T7 111Z 7” (3k pcs) 6 Ld CSP (2x3) MDP0054
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
Pinout
ISL59111
(6 Ld CSP)*
TOP VIEW BOTTOM VIEW
*0.7mm MAXIMUM HEIGHT GUARANTEED
OUT
GND
SAG
VDD
IN
EN
1
3
2
B
A
OUT
GND
SAG
VDD
IN
EN
1
3
2
B
A
Data Sheet April 19, 2007
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2005-2007. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.
2
FN6172.4
April 19, 2007
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typ values are for information purposes only. Unless otherwise noted, all tests are
at the specified temperature and are pulsed tests, therefore: T
J
= T
C
= T
A
Absolute Maximum Ratings (T
A
= +25°C)
Supply Voltage from V
S
+ to GND . . . . . . . . . . . . . . . . . . . . . . . 3.6V
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . V
S
+ +0.3V to GND -0.3V
Continuous Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . 40mA
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Curves
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +125°C
Ambient Operating Temperature . . . . . . . . . . . . . . . .-40°C to +85°C
Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +125°C
Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Electrical Specifications V
S
+
= 3.3V, T
A
= +25°C, R
L
= 150Ω to GND, C
L
= 0.1µF, unless otherwise specified.
DESCRIPTION PARAMETER CONDITIONS MIN TYP MAX UNIT
INPUT CHARACTERISTICS
V
CC
Supply Voltage Range 2.5 3.6 V
I
DD-ON
Quiescent Supply Current V
IN
= 500mV, EN = V
DD
, no load 2 2.75 mA
I
DD-OFF
Shutdown Supply Current EN = 0V 3 µA
V
OLS
Output Level Shift Voltage V
IN
= 0V, no load 60 130 200 mV
V
CLAMP
Input Voltage Clamp I
IN
= -1mA -40 -15 +10 mV
I
CLAMP_CHG
Clamp Charge Current V
IN
= V
CLAMP
- 100mV -6 -3 mA
I
CLAMP_DCHG
Clamp Discharge Current V
IN
= 500mV 2.5 5 7.5 µA
R
IN
Input Resistance 0.5V < V
IN
< 1.0V 0.5 3 MΩ
A
V
Voltage Gain R
L
= 150Ω 1.95 2.0 2.04 V/V
A
SAG
SAG Correction DC Gain to V
OUT
SAG open 2.25 V/V
PSRR DC Power Supply Rejection V
DD
= 2.7V to 3.3V 43 63 dB
V
OH
Output Voltage High Swing V
IN
= 2V, R
L
= 150Ω to GND 2.85 3.2 V
I
SC
Output Short-Circuit Current V
IN
= 2V, to GND through 10Ω -94 -65 mA
V
IN
= 100mV, out short to V
DD
through 10Ω 65 115 mA
I
ENABLE
Enable Current ±3.3V, enable pin = 0V -3 0 +3 µA
V
IL
Disable Threshold V
DD
= 2.7V to 3.3V 0.8 V
V
IH
Enable Threshold V
DD
= 2.7V to 3.3V 1.6 V
R
OUT
Shutdown Output Impedance EN = 0V DC 3.6 4.5 5.9 kΩ
EN = 0V, f = 4.5MHz 3.4 kΩ
AC PERFORMANCE
BW ±0.1dB Bandwidth R
L
= 150Ω, C
L
= 5pF 4 MHz
BW -3dB Bandwidth R
L
= 150Ω, C
L
= 5pF 8 MHz
Normalized Stopband Gain f = 27MHz -24.2 dB
dG Differential Gain NTSC and PAL DC coupled 0.10 %
NTSC and PAL AC coupled 0.84 %
dP Differential Phase NTSC and PAL DC coupled 0.05 °
NTSC and PAL AC coupled 0.62 °
D/DT Group Delay Variation f = 100kHz, 5MHz 5.4 ns
SNR Signal To Noise Ratio 100% white signal 65 dB
ISL59111
3
FN6172.4
April 19, 2007
T
ON
Enable Time V
IN
= 500mV, V
OUT
to 1% 200 ns
T
OFF
Disable Time V
IN
= 500mV, V
OUT
to 1% 14 ns
+SR Positive Slew Rate 10% to 90%, V
IN
= 1V step 20 41 70 V/µs
-SR Negative Slew Rate 90% to 10%, V
IN
= 1V step -15 -30 -70 V/µs
t
F
Fall Time 2.5V
STEP
, 80% - 20% 25 ns
t
R
Rise Time 2.5V
STEP
, 20% - 80% 22 ns
Electrical Specifications V
S
+
= 3.3V, T
A
= +25°C, R
L
= 150Ω to GND, C
L
= 0.1µF, unless otherwise specified. (Continued)
DESCRIPTION PARAMETER CONDITIONS MIN TYP MAX UNIT
Typical Performance Curves
FIGURE 1. GAIN vs FREQUENCY -0.1dB FIGURE 2. GAIN vs FREQUENCY -3dB POINT
FIGURE 3. GAIN vs FREQUENCY -3dB FIGURE 4. GAIN vs FREQUENCY FOR VARIOUS R
LOAD
100K
FREQUENCY (Hz)
NORMALIZED GAIN (dB)
10M1M
0.5
0.3
0.1
-0.1
-0.3
-0.5
-0.1dB BW
@ 4MHz
V
DD
=+3.3V
R
L
=150Ω
C
L
=5pF
ISL59111
P1-P3P4-P6P7-P9P10-P10

ISL59111IIZ-T7

Mfr. #:
Buy ISL59111IIZ-T7
Manufacturer:
Renesas / Intersil
Description:
Video Amplifiers ISL6271 PLL & SRAMG 4 INTEL PROCSRS EVAL
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet