SF10AG - SF10JG
© Diodes Incorporated
NOT RECOMMENDED FOR NEW DESIGN
SF10AG - SF10JG
1.0A SUPER-FAST GLASS PASSIVATED RECTIFIER
Features
Glass Passivated Die Construction
Super-Fast Switching for High Efficiency
Surge Overload Rating to 30A Peak
Low Reverse Leakage Current
Lead Free Finish, RoHS Compliant (Note 4)
Mechanical Data
Case: DO-41
Case Material: Molded Plastic. UL Flammability Classification
Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020C
Terminals: Finish - Tin. Plated Leads Solderable per MIL-STD-202,
Method 208
Polarity: Cathode Band
Marking: Type Number
Ordering Information: See Page 3
Weight: 0.3 grams (approximate)
Maximum Ratings and Electrical Characteristics @T
A
= 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage (Note 5)
Average Rectified Output Current @ T
A
= 75C
(Note 1)
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
Forward Voltage @ I
F
= 1.0A
Peak Reverse Current @ T
A
= 25C
at Rated DC Blocking Voltage (Note 5) @ T
A
= 100C
Reverse Recovery Time (Note 3)
Typical Total Capacitance (Note 2)
Thermal Resistance Junction to Ambient
Operating and Storage Temperature Range
Notes: 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. Measured with I
F
= 0.5A, I
R
= 1.0A, I
rr
= 0.25A. See figure 5.
4. RoHS revision 13.2.2003. High temperature solder exemption applied, see EU Directive Annex Note 7.
5. Short duration pulse test used to minimize self-heating effect.