Fiber Optic Transmitter
OPF347 Family
© TT electronics plc
Issue C 08/2016 Page 1
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
Description:
The OPF347 family fiber opc transmiers are high performance devices packaged for data communicaon links. This
transmier is an 850nm GaAlAs LED and is specifically designed to efficiently launch opcal power into fibers ranging in size
from 50/125µm up to 200/300µm diameter fiber. Mulple power ranges with upper and lower limits are offered which
allows the designer to select a device best suited for the applicaon.
This product’s combinaon of features including high speed and efficient coupled power makes it an ideal transmier for
integraon into all types of data communicaons equipment.
The mechanical design of this packaged is intended for PC Board or panel mounng. It is shipped with a lock washer, jam
nut, 2 #2-56 screws, and a protecve dust cap.
Applications:
• Industrial Ethernet equipment
• Copper-to-fiber media conversion
• Intra-system fiber opc links
• Video surveillance systems
Features:
• Low Cost 850 nm LED technology
• Popular ST
®
style receptacle
• Pre-tested with fiber to assure performance
• Component pre-mounted and ready to use
• Extended temperature range
• 75MHz operaon
Typical Coupled Power
I
F
= 100mA, 25°C
Fiber Size Type N.A. OPF347A
50/125 µm Graded Index 0.20 25µW
62.5/125 µm Graded Index 0.28 45µW
100/140 µm Graded Index 0.29 125µW
200/300 µm Step Index 0.41 475µW
OPF347D
7.5µW
14µW
38µW
140µW
OPF347B
18µW
34µW
95µW
340µW
OPF347C
12.5µW
22µW
62µW
235µW
RoHS
ESD Class 2
ST
®
is a registered trademark of AT&T.
All Optek OPF LED emiers are AEL Class I as defined
by IEC 60825-1 and are Risk Group 1 (Low-Risk) as de-
fined by IEC 62471.