OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

PS9121-AX

P1-P3P4-P6P7-P9P10-P12P13-P15
PS9121
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter Symbol Ratings Unit
Diode Forward Current
*1
IF 30 mA
Reverse Voltage VR 5 V
Detector
Supply Voltage VCC 7 V
Output Voltage VO 7 V
Output Current IO 25 mA
Power Dissipation
*2
PC 40 mW
Isolation Voltage
*3
BV 3 750 Vr.m.s.
Operating Ambient Temperature TA −40 to +85 °C
Storage Temperature Tstg −55 to +125 °C
*1 Reduced to 0.3 mA/°C at T
A = 25°C or more.
*2 Applies to output pin V
O (collector pin). Reduced to 1.5 mW/°C at TA = 65°C or more.
*3 AC voltage for 1 minute at T
A = 25°C, RH = 60% between input and output.
Pins 1-2 shorted together, 3-5 shorted together.
RECOMMENDED OPERATING CONDITIONS
Parameter Symbol MIN. TYP. MAX. Unit
Low Level Input Voltage VFL 0 0.8 V
High Level Input Current IFH 6.3 10 12.5 mA
Supply Voltage VCC 2.7 3.3 3.6 V
TTL (RL = 1 kΩ, loads) N 5
Pull-up Resistor RL 330 4 k
Ω
Data Sheet PN10502EJ05V0DS
4
PS9121
ELECTRICAL CHARACTERISTICS (TA = −40 to +85°C, unless otherwise specified)
Parameter Symbol Conditions MIN. TYP.
*1
MAX. Unit
Diode Forward Voltage VF IF = 10 mA, TA = 25°C 1.4 1.65 1.8 V
Reverse Current IR VR = 3 V, TA = 25°C 10
μ
A
Terminal Capacitance Ct V = 0 V, f = 1 MHz, TA = 25°C 30 pF
Detector High Level Output Current IOH VCC = VO = 3.3 V, VF = 0.8 V 1 80
μ
A
VCC = VO = 5.5 V, VF = 0.8 V 1
*2
Low Level Output Voltage
*3
VOL VCC = 3.3 V, IF = 5 mA, IOL = 13 mA 0.2 0.6 V
VCC = 5.5 V, IF = 5 mA, IOL = 13 mA 0.2
*2
High Level Supply Current ICCH VCC = 3.3 V, IF = 0 mA, VO = Open 4 7 mA
VCC = 5.5 V, IF = 0 mA, VO = Open 5
*2
Low Level Supply Current ICCL VCC = 3.3 V, IF = 10 mA, VO = Open 7 10
VCC = 5.5 V, IF = 10 mA, VO = Open 9
*2
Coupled Threshold Input Current IFHL VCC = 3.3 V, VO = 0.8 V, RL = 350 Ω 2.5 5
(H → L) VCC = 5 V, VO = 0.8 V, RL = 350 Ω 2.5
*2
Isolation Resistance RI-O VI-O = 1 kVDC, RH = 40 to 60%,
T
A = 25°C
10
11
Ω
Isolation Capacitance CI-O V = 0 V, f = 1 MHz, TA = 25°C 0.6 pF
Propagation Delay Time tPHL TA = 25°C 40 75 ns
(H → L)
*4
VCC = 3.3 V, RL = 350 Ω, IF = 7.5 mA 100
VCC = 5 V, RL = 350 Ω, IF = 7.5 mA 37
*2
Propagation Delay Time tPLH TA = 25°C 45 75
(L → H)
*4
VCC = 3.3 V, RL = 350 Ω, IF = 7.5 mA 100
VCC = 5 V, RL = 350 Ω, IF = 7.5 mA 40
*2
Rise Time tr VCC = 3.3 V, RL = 350 Ω, IF = 7.5 mA 20
VCC = 5 V, RL = 350 Ω, IF = 7.5 mA 20
*2
Fall Time tf VCC = 3.3 V, RL = 350 Ω, IF = 7.5 mA 5
VCC = 5 V, RL = 350 Ω, IF = 7.5 mA 5
*2
Pulse Width Distortion ⏐tPHL-tPLH⏐ VCC = 3.3 V, RL = 350 Ω, IF = 7.5 mA 5 35
(PWD)
*4
VCC = 5 V, RL = 350 Ω, IF = 7.5 mA 3
*2
Propagation Delay Skew tPSK VCC = 3.3 V, RL = 350 Ω, IF = 7.5 mA 40
Common Mode
Transient Immunity at High
Level Output
*5
CM
H VCC = 3.3 V, RL = 350 Ω, TA = 25°C,
I
F = 0 mA, VO > 2 V, VCM = 1 kV
15 20 kV/
μ
s
VCC = 5 V, RL = 350 Ω, TA = 25°C,
I
F = 0 mA, VO > 2 V, VCM = 1 kV
20
*2
Common Mode
Transient Immunity at Low
Level Output
*5
CM
L VCC = 3.3 V, RL = 350 Ω, TA = 25°C,
I
F = 7.5 mA, VO < 0.8 V, VCM = 1 kV
15 20
VCC = 5 V, RL = 350 Ω, TA = 25°C,
I
F = 7.5 mA, VO < 0.8 V, VCM = 1 kV
20
*2
Data Sheet PN10502EJ05V0DS
5
PS9121
*1 Typical values at TA = 25°C
*2 These values are reference values.
*3 Because VOL of 2 V or more may be output when LED current input and when output supply of VCC = 2.6 V or
less, it is important to confirm the characteristics (operation with the power supply on and off) during design,
before using this device.
*4 Test circuit for propagation delay time
Input
Output
1.5 V
V
OL
t
PHL
t
PLH
(I
F
= 7.5 mA)
50%
47 Ω
Pulse input (I
F
)
V
O
(monitor)
V
CC
= 3.3 V
Input
(monitor)
0.1 F
μ
C
L
= 15 pF
R
L
= 350 Ω
(PW = 1 s,
Duty cycle = 1/10)
μ
Remark CL includes probe and stray wiring capacitance.
*5 Test circuit for common mode transient immunity
90%
10%
1 kV
0 V
V
OH
2 V
0.8 V
V
OL
V
CM
V
O
(I
F
= 0 mA)
V
O
(I
F
= 7.5 mA)
t
r
t
f
V
O
(monitor)
V
CC
= 3.3 V
0.1 F
μ
C
L
= 15 pF
SW
V
CM
I
F
R
L
= 350 Ω
Remark CL includes probe and stray wiring capacitance.
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static
electricity when handling.
2. By-pass capacitor of 0.1
μ
F is used between VCC and GND near device. Also, ensure that the distance between
the leads of the photocoupler and capacitor is no more than 10 mm.
3. Avoid storage at a high temperature and high humidity.
Data Sheet PN10502EJ05V0DS
6
P1-P3P4-P6P7-P9P10-P12P13-P15

PS9121-AX

Mfr. #:
Buy PS9121-AX
Manufacturer:
Renesas Electronics
Description:
High Speed Optocouplers 3.3V 5pin SOP Digi OC HI CMRR NL
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet