CAX803, CAX809, CAX810
http://onsemi.com
9
Table 5. ORDERING PART NUMBER
Order Number Voltage
Top Mark
(Note 3)
Output Reset Package
Quantity per Reel
(Note 4)
CAX803LTBI−T3 4.63 V
VKL
Open
Drain
LOW SOT−23−3 3,000
CAX803MTBI−T3 4.38 V
CAX803JTBI−T3 4.00 V
CAX803TTBI−T3 3.08 V
CAX803STBI−T3 2.93 V
CAX803RTBI−T3 2.63 V
CAX803ZTBI−T3 2.32 V
CAX809LTBI−T3 4.63 V
VLD
CMOS /
Push−Pull
LOW SOT−23−3 3,000
CAX809HTBI−T3 4.55 V
CAX809MTBI−T3 4.38 V
CAX809JTBI−T3 4.00 V
CAX809TTBI−T3 3.08 V
CAX809STBI−T3 2.93 V
CAX809RTBI−T3 2.63 V
CAX809ZTBI−T3 2.32 V
CAX810LTBI−T3 4.63 V
VHT
CMOS /
Push−Pull
HIGH SOT−23−3 3,000
CAX810MTBI−T3 4.38 V
CAX810JTBI−T3 4.00 V
CAX810TTBI−T3 3.08 V
CAX810STBI−T3 2.93 V
CAX810RTBI−T3 2.63 V
CAX810ZTBI−T3 2.32 V
3. Threshold and full part numbers will be provided on box and reel labels as well as all Shipping documents.
4. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
5. For detailed information and a breakdown of device nomenclature and numbering systems, please see the ON Semiconductor Device
Nomenclature document, TND310/D, available at www.onsemi.com
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
CAX803/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
