Teensy 3.5 (Headers)
DEV‐14056RoHS
Description: The Teensy is a breadboard-friendly development board with loads of features in
a, well, teensy package. Each Teensy 3.5 comes with headers already attached and pre-flashed
with a bootloader so you can program it using the onboard USB connection; no external
programmer needed! You can program for the Teensy in your favorite program editor using C,
or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for it!
The processor on the Teensy also has access to the USB and can emulate any kind of USB
device you need it to be, making it great for USB-MIDI and other HID projects. The 32-bit,
120MHz processor brings a few other features to the table as well, such as multiple channels of
Direct Memory Access, several high-resolution ADCs and even an I
2S digital audio interface!
There are also four separate interval timers, plus a delay timer! Oh yeah, and all digital pins
have interrupt capability and are 5V tolerant.
Allofthisfunctionalityisjammedintoa62.3mmx18mmboardwithallheadersona0.1"gridsoyoucan
slapitonabreadboardandgettowork!TheTeensy3.5(aswellasitssibling,theTeensy3.6)islarger,
fasterandcapableofmoreprojects,especiallywithitsonboardmicroSDcardport.AnupgradedARM
CortexMCU(120MHzfrom72MHz),morememory(512Kfrom256K)—aswellasmoreRAM,EEPROM
andaccessiblepins—makeupthekeynewfeaturesofthisboard.TheTeensy3.5isslightlyscaleddown
fromtheTeensy3.6butisofferedatalessexpensivepricepoint.
Note: This does not come with a USB cable;
