1/10February 2003
■ 5V TOLERANT INPUTS AND OUTPUTS
■ HIGH SPEED :
f
MAX
= 150MHz (MIN.) at V
CC
=3V
■ POWER DOWN PROTECTION ON INPUTS
AND OUTPUTS
■ SYMMETRICAL OUTPUT IMPEDANCE:
|I
OH
|=I
OL
= 24mA (MIN) at V
CC
=3V
■ PCI BUS LEVELS GUARANTEED AT 24 mA
■ BALANCED PROPAGATION DELAYS:
t
PLH
≅ t
PHL
■ OPERATING VOLTAGE RANGE:
V
CC
(OPR) = 2.0V to 3.6V (1.5V Data
Retention)
■ PIN AND FUNCTION COMPATIBLE WITH
74 SERIES 16374
■ LATCH-UP PERFORMANCE EXCEEDS
500mA (JESD 17)
■ ESD PERFORMANCE:
HBM > 2000V (MIL STD 883 method 3015);
MM > 200V
DESCRIPTION
The 74LCX16374 is a low voltage CMOS 16 BIT
D-TYPE FLIP-FLOP with 3 STATE OUTPUTS
NON INVERTING fabricated with sub-micron
silicon gate and double-layer metal wiring C
2
MOS
technology. It is ideal for low power and high
speed 3.3V applications; it can be interfaced to 5V
signal environment for both inputs and outputs.
These 16 bit D-TYPE flip-flops are controlled by
two clock inputs (nCK) and two output enable in-
puts(nOE
). On the positive transition of the (nCK),
the nQ outputs will be set to the logic state that
were setup at the nD inputs. While the (nOE
) input
is low, the 8 outputs (nQ) will be in a normal state
(high or low logic level) and while high level the
outputs will be in a high impedance state.
Any output control does not affect the internal op-
eration of flip flops; that is, the old data can be re-
tained or the new data can be entered even while
the outputs are off.
It has same speed performance at 3.3V than 5V
AC/ACT family, combined with a lower power
consumption.
All inputs and outputs are equipped with protec-
tion circuits against static discharge, giving them
2KV ESD immunity and transient excess voltage.
74LCX16374
LOW VOLTAGE CMOS 16-BIT D-TYPE FLIP-FLOP (3-STATE)
WITH 5V TOLERANT INPUTS AND OUTPUTS
ORDER CODES
PACKAGE TUBE T & R
TSSOP 74LCX16374TTR
TSSOP
PIN CONNECTION
