R
o
H
S
Telecom Design Guide • © 2006 Littelfuse 3 - 25 www.littelfuse.com
SIDACtor Devices
T10A SIDACtor® Device
The bi-directional T10A devices are a through-hole technology SIDACtor protector. It is
intended for cost-sensitive telecommunication applications. This T10 SIDACtor series
enables equipment to comply with various regulatory requirements including GR 1089, ITU
K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968-A (formerly known as FCC
Part 68).
* For surge ratings, see table below.
General Notes:
• All measurements are made at an ambient temperature of 25 °C. I
PP
applies to -40 °C through +85 °C temperature range.
• I
PP
is a repetitive surge rating and is guaranteed for the life of the product.
• Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
• V
DRM
is measured at I
DRM.
• V
S
is measured at 0.5 V/µs.
• Special voltage (V
S
and V
DRM
) and holding current (I
H
) requirements are available upon request.
* Current waveform in µs
** Voltage waveform in µs
Electrical Parameters
Part
Number *
V
DRM
@ 5 µA
Volts
V
S
Volts
V
T
Volts
I
S
mAmps
I
H
mAmps
pF
TYP
T10A060B 58 80 4 800 120 50
T10A060E 58 80 4 800 180 50
T10A062 60 82 4 800 150 50
T10A068 65 90 4 800 150 50
T10A080B 75 120 4 800 120 43
T10A080E 75 120 4 800 180 43
T10A100 100 133 4 800 150 43
T10A110B 110 135 4 800 120 38
T10A110E 110 135 4 800 180 38
T10A120 120 160 4 800 150 38
T10A130 130 173 4 800 150 38
T10A140B 140 170 4 800 120 34
T10A140E 140 170 4 800 180 34
T10A180 180 240 4 800 150 34
T10A180B 175 210 4 800 120 32
T10A180E 175 210 4 800 180 32
T10A200 200 267 4 800 150 30
T10A220 220 293 4 800 150 30
T10A220B 215 265 4 800 120 30
T10A220E 215 265 4 800 180 30
T10A240 240 320 4 800 150 30
T10A270 270 360 4 800 150 30
T10A270B 270 360 4 800 120 30
T10A270E 270 360 4 800 180 30
Surge Ratings in Amps
Series
I
PP
I
TSM
50 / 60 Hz di/dt
8x20 *
1.2x50 **
5x310 *
10x700 **
10x1000 *
10x1000 **
Amps Amps Amps Amps Amps/µs
A 100 37.5 50 30 100