IXYS reserves the right to change limits, test conditions and dimensions © 2010 IXYS All rights reserved
IXYS KOREA LTD. 1 IXYS Corporation
A-dong #1106, Uspace 1, 660 Daewangpangyo-ro, 1590 Buckeye Drive, Milpitas,
Bundang-gu, Seongnam-si, Gyeonggi-Do (Korea) CA 95035-7418, United States
Phone +82-70-7113-0300, Fax +82-70-7113-0301 Rev. June. 2016 Phone (408) 457-9000, Fax 408-496-0670
IXOLAR
TM
High Efficiency SolarBIT.
Description
IXOLAR
TM
SolarBITs are IXYS’ product line of SolarBITs made of monocrystalline, high efficiency solar
cells. The IXOLAR
TM
SolarBITs is an ideal for charging various battery powered and handheld consumer
products such as mobile phones, cameras, RF-ID Tag, PDAs, MP3-Players and toys. They are also
suitable for industrial applications such as wireless sensors, portable instrumentation and for charging
emergency backup batteries.
With a cell efficiency of typically 22% measured at a wafer level, SolarBITs give the ability to extend run
time even in "low light" conditions and increase battery life and run time in a small footprint, which can be
easily accommodated in the design of Portable Products. The design allows connecting SolarBITs flexibly in
series and/or parallel to perfectly meet the application’s power requirements.
IXOLAR
TM
products have a very good response over a wide wavelength range and therefore can be used in
both indoor and outdoor applications.
Product and Ordering Information (Package Level)
(parameters given are typical values)
Dimensions (L x W x H): 22 x 7 x 1.8 [mm]
SolarBITs Weight: 0.5 grams
Storage Temperature : -40°C ~ +90°C
SolarBITs are compliant to the RoHS Norm.
Electrical Characteristics
short circuit current density (wafer Level)
voltage at max. power point
current density at max. power point (wafer Level)
maximum peak power (wafer Level)
solar cell efficiency (wafer Level)
open circuit voltage temp. coefficient (wafer Level)
short circuit current temp. coefficient (wafer Level)
* All values measured at Standard Condition: 1 sun (= 100 mW/cm²), Air Mass 1.5, 25°C
Short Circuit
Current [mA]
Features
• Monocrystalline silicon technology
• High efficiency outdoor and indoor
• Long life and stable output
• Sealed Package
• High mechanical robustness
• Surface Mount Package
• Reflow Solderable
Applications
• Battery chargers for portables such as cell
phones, PDAs, GPS-Systems, …
• “Green” electricity generation
• Power backup for UPS, Sensors, Wearables
Advantages
• Automatic Pick & Place Mounting
• One Product for Multiple Applications
• Flexible Integration into the Application