Note 1: Use M3x12mm long pan head self-taping screw.
P=0.5
9
17.6
A
Ø1
6
(6.425)
9.8
(3.375)
15
6.150.9
8.1
No.1
No.2
No.19
No.18
No.1
(0.18)
No.19
6.15
6.425
9.8
(3.375)
PCB mounting surface
15.6
10.6
13
1.34.5
8-R0.5 MAX
Ø3.6
Part NumberCL No.RoHS
MD60-19PA243-0003-3YES
BRecommended Panel Cutout
BRecommended Panel Cutout
5.6
PCB edge
2
2-Ø1.1
8.1
13.4
18.2
0.5
9
0.35 ± 0.05 Solder pad
2.4
3.7
2
1.71.9
BRecommended PCB mounting pattern
5.6
PCB edge
2
2-Ø1.1
8.1
13.4
18.2
0.5
9
0.35 ± 0.05 Solder pad
2.4
3.7
2
1.71.9
BRecommended PCB mounting pattern
Note 1: Tape and reel packaging (750 pieces/reel).
Order by number of reels.
All dimensions: mm
All dimensions: mmPanel thickness: 1.6 mm max.
All dimensions: mmPanel thickness: 1.6 mm max.
Tray packaging
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
5
MD Series●HDMI™ Standard Connectors
■Plug
3.8
No.18
No.19
No.1
No.2
13.2
13.45
3.5
4.5
0.8
Part NumberCL No.RoHS
MD40-19S
* Supplied separate as shown.
Note: Plug cable termination and overmold recommendations are available upon request.
Contact your Hirose sales representative for details.
CL243-0002-0
YES
Shell - bottom
Shell - top
Assembly
(insulator/contacts)
Assembly (insulator / contacts)
Shell - topShell- bottom
All dimensions: mm
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
6
MD Series●HDMI™ Standard Connectors
■Packaging Specifications
■Recommended Temperature Profile
Unreeling direction
16±0.1
(32.4)(2)
Unreeling direction
32±0.3
(Ø380)
120±30s
20±10s
Time(Seconds)
Temperature(ç)
Preheating
PEAK: 250ç
230ç
Soldering
250
200
150
150ç
180ç
100
50
Note 1: Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that there
is a return to normal temperature between the first and second cycle.
Note 2: The temperature profile indicates the board surface temperature at the point of contacts with the
connector terminals.
●
Embossed carrier tape dimensions
●
Reel Dimensions
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.