2
MD Series●HDMI™ Standard Connectors
●
Receptacles
■Specifications
Ratings
0.5A
125V AC
Current rating
Voltage rating
Operating temperature range : -55°C to +85°C
■Materials / Finishes
Insulator LCP ------- UL94V-0
Contacts Copper alloy
Contact area: Gold plating over nickel
-------
Lead area: Gold flash plating over nickel -------
Shell Copper alloy Tin plating over nickel -------
Part Material Finish Remarks
Item Specification Conditions
1. Contact resistance 100mA (DC or 1,000Hz)
2. Insulation resistance 100 Mø min. 500V DC
3. Withstanding voltage No flashover or insulation breakdown 500 V AC / 1 minute
4. Durability 10,000 cycles
5. Vibration
6. Shock
7. Temperature cycle
8. Salt spray No corrosion 5% salt water solution / 48 hours
Acceleration of 490m/s
2
, 11 ms continuous time, sine
half-wave, 3 test cycles in each of the 3 directions
Frequency: 55 to 2,000 Hz, total amplitude of 1.5 mm
Acceleration of 147 m/s
2
, 12 test cycles in each of the 3 directions
Signal: 60 mø max.
Shell: 30 mø max.
Contact resistance of contacts: Change of 30mø max.
Contact resistance of shell: Change of 50mø max.
No electrical discontinuity of 1 µs or longer.
Contact resistance, contacts: Change of 30 mø max.
Contact resistance, shell: Change of 50 mø max.
No damage, cracks, or parts dislocation
Contact resistance, contacts: Change of 30 mø max.
Contact resistance, shell: Change of 50 mø max.
No damage, cracks, or parts dislocation
Temperature:-55ç/+15ç to 35ç/+85ç/+15ç to 35ç
Times: 30 min./ 2 min.to 3 min. / 30 min./ 2 min. to 3 min
10 cycles
●
Plugs
Insulator LCP ------- UL94V-0
Contacts Copper alloy
Contact area: Gold plating over nickel
-------
Lead area: Gold flash plating over nickel -------
Shell Copper alloy Tin plating over nickel -------
Part Material Finish Remarks
