High Performance Thermal Circuit Breaker 483-...
www.e-t-a.
de
1646
4
1
Splash cover/hex nut assembly with O ring (IP54)
(approved to VG 95345, T23)
X 200 802 01 nickel plated nut
X 200 802 02 matt black finish nut
Splash cover/hex nut assembly with O ring (IP66 and IP67)
(approved to VG 95345, T23)
X 200 801 08 nickel plated nut, transparent cover
X 200 801 03 matt black finish nut, black cover
X 200 801 09 matt black finish nut 7/16-32, black cover
X 200 801 12 with blackened nut and transparent cover
Actuator extension (black) to be fitted on the push button
(approved to VG 95345, T23)
X 200 803 01
M12x1 or
.071
7/16-32
1.8
M12x1
ø20
17
ø.787
.669
Other main terminal and threadneck designs
Accessories
Typical time/current characteristics
Mounting -G6
Terminal design -J3
Terminal design -J2
Terminal distances to:
MS 14 105 (a, b)
MS 14 153 (a, b)
MS 22 073 (a)
MS 22 074 (a)
MS 25 244 (a)
MS 25 373 (a, b)
Terminal distances to:
MS 26 574 (a, b)
45°
b
a
45°
10.5
(31 mm/1.22 in.)
(18 mm/.709 in.)
.413
(15 mm/.591 in.)
b
a
45°
8.5
(35.5 mm/1.40 in.)
.335
12.5 OFF
6.5 ON
black
white
9.4
.256
.492
.370
-55 °C
+67 °F
+ 23 °C
+ 73.4 °F
Trip time in seconds
+125 °C
+ 257 °F
12468
10 20 40
… times rated current
10000
1000
100
10
1
0.1
0.01
0.001
6080100
Accessories
Identification collar to be snapped on the push button
307 004 01 black
307 004 02 white
307 004 03 red
307 004 04 green
307 004 05 blue
6.4
ø6.85
ø12.35
ø14
.270
.551
.486
.252
0.65
.026
Lock out ring to block the push button in OFF position
307 005 01 red
307 005 02 black
0.8
.031
ø10.9
ø14.6
.575
.429
7.7
.303
This is a metric design and millimeter dimensions take precedence (
mm
)
inch
All dimensions without tolerances are for reference only. In the interest of improved design,
performance and cost effectiveness the right to make changes in these specifications
without notice is reserved.Product markings may not be exactly as the ordering codes.
Errors and omissions excepted.
