AFCT-57J5ATPZ Datasheet AFCT-57J5ATPZ | P13-P15

Byte # Data Byte # Data

Decimal Hex Notes Decimal Hex Notes

0 03 SFP physical device 37 00 Hex Byte of Vendor OUI

[1]

1 04 SFP function de ned by serial ID only 38 17 Hex Byte of Vendor OUI

[1]

2 07 LC optical connector 39 6A Hex Byte of Vendor OUI

[1]

3 00 40 41 “A” - Vendor Part Number ASCII character

4 00 41 46 “F” - Vendor Part Number ASCII character

5 00 42 43 “C” - Vendor Part Number ASCII character

6 00 43 54 “T” - Vendor Part Number ASCII character

7 12 Long distance 44 2D “-” - Vendor Part Number ASCII character

8 00 45 35 “5” - Vendor Part Number ASCII character

9 01 Single Mode (SM) 46 37 “7” - Vendor Part Number ASCII character

10 00 47 4A “J” - Vendor Part Number ASCII character

11 01 Compatible with 8B/10B encoded data 48 35 “5” - Vendor Part Number ASCII character

12 1F 3100 MBit/sec nominal bit rate (3.072 Gbit/s) 41 41 “A” - Vendor Part Number ASCII character

13 00 54 54 “T” - Vendor Part Number ASCII character

14 14 20 km of single mode  ber @ 3.1GBit/sec 50 50 “P” - Vendor Part Number ASCII character

15 C8 20km of single mode  ber @ 3.1Gbit/sec 5A 5A “Z” - Vendor Part Number ASCII character

16 00 53 20 “ ” - Vendor Part Number ASCII character

17 00 54 20 “ ” - Vendor Part Number ASCII character

18 00 55 20 “ ” - Vendor Part Number ASCII character

19 00 56 20 “ ” - Vendor Part Number ASCII character

20 41 “A” - Vendor Name ASCII character 57 20 “ ” - Vendor Part Number ASCII character

21 56 “V” - Vendor Name ASCII character 58 20 “ ” - Vendor Part Number ASCII character

22 41 “A” - Vendor Name ASCII character 59 20 “ ” - Vendor Part Number ASCII character

23 47 “G” - Vendor Name ASCII character 60 05 Hex Byte of Laser Wavelength

[2]

24 4F “O” - Vendor Name ASCII character 61 1E Hex Byte of Laser Wavelength

[2]

25 20 “ ” - Vendor Name ASCII character 62 00

26 20 “ ” - Vendor Name ASCII character 63 Checksum for Bytes 0-62

[3]

27 20 “ ” - Vendor Name ASCII character 64 00

28 20 “ ” - Vendor Name ASCII character 65 1A Hardware SFP TX_DISABLE, TX_FAULT,

& RX_LOS

29 20 “ ” - Vendor Name ASCII character 66 00

30 20 “ ” - Vendor Name ASCII character 67 00

31 20 “ ” - Vendor Name ASCII character 68-83 Vendor Serial Number ASCII characters

[4]

32 20 “ ” - Vendor Name ASCII character 84-91 Vendor Date Code ASCII characters

[5]

33 20 “ ” - Vendor Name ASCII character 92 68 Digital Diagnostics, Internal Cal, Rx Pwr

Avg

34 20 “ ” - Vendor Name ASCII character 93 F0 A/W, Soft SFP TX_DISABLE, TX_FAULT,

& RX_LOS

35 20 “ ” - Vendor Name ASCII character 94 01 SFF-8472 Compliance to revision 9.3

36 00 95 Checksum for Bytes 64-94

[4]

96 - 255 00

Notes:

1. The IEEE Organizationally Unique Identi er (OUI) assigned to Avago Technologies is 00-17-6A (3 bytes of hex).

2. Laser wavelength is represented in 16 unsigned bits. The hex representation of 1310 (nm) is 051E.

3. Addresses 63 and 95 are checksums calculated (per SFF-8472 and SFF-8074) and stored prior to product shipment.

4. Addresses 68-83 specify the AFCT-57J5ATPZ ASCII serial number and will vary on a per unit basis.

5. Addresses 84-91 specify the AFCT-57J5ATPZ ASCII date code and will vary on a per date code basis.

Table 12. EEPROM Serial ID Memory Contents – Conventional SFP Memory (Address A0h)

Table 13: EEPROM Serial ID Memory Contents – Enhanced Feature Set Memory (Address A2h)

Byte # Byte # Byte #

Decimal Notes Decimal Notes Decimal Notes

0 Temp H Alarm MSB

[1]

26 Tx Pwr L Alarm MSB

[4]

104 Real Time Rx average

MSB

[5]

1 Temp H Alarm LSB

[1]

27 Tx Pwr L Alarm LSB

[4]

105 Real Time Rx average

LSB

[5]

2 Temp L Alarm MSB

[1]

28 Tx Pwr H Warning MSB

[4]

106 Reserved

3 Temp L Alarm LSB

[1]

29 Tx Pwr H Warning LSB

[4]

107 Reserved

4 Temp H Warning MSB

[1]

30 Tx Pwr L Warning MSB

[4]

108 Reserved

5 Temp H Warning LSB

[1]

31 Tx Pwr L Warning LSB

[4]

109 Reserved

6 Temp L Warning MSB

[1]

32 Rx Pwr H Alarm MSB

[5]

110 Status/Control - See

Table 14

7 Temp L Warning LSB

[1]

33 Rx Pwr H Alarm LSB

[5]

111 Reserved

8 Vcc H Alarm MSB

[2]

34 Rx Pwr L Alarm MSB

[5]

112 Flag Bits - See Table 15

9 Vcc H Alarm LSB

[2]

35 Rx Pwr L Alarm LSB

[5]

113 Flag Bits - See Table 15

10 Vcc L Alarm MSB

[2]

36 Rx Pwr H Warning MSB

[5]

114 Reserved

11 Vcc L Alarm LSB

[2]

37 Rx Pwr H Warning LSB

[5]

115 Reserved

12 Vcc H Warning MSB

[2]

38 Rx Pwr L Warning MSB

[5]

116 Flag Bits - See Table 15

13 Vcc H Warning LSB

[2]

39 Rx Pwr L Warning LSB

[5]

117 Flag Bits - See Table 15

14 Vcc L Warning MSB

[2]

40-55 Reserved 118-127 Reserved

15 Vcc L Warning LSB

[2]

56-94 External Calibration Constants

[6]

128-247 Customer Writeable

16 Tx Bias H Alarm MSB

[3]

95 Checksum for Bytes 0-94

[7]

248-255 Vendor Speci c

17 Tx Bias H Alarm LSB

[3]

96 Real Time Temperature MSB

[1]

18 Tx Bias L Alarm MSB

[3]

97 Real Time Temperature LSB

[1]

19 Tx Bias L Alarm LSB

[3]

98 Real Time Vcc MSB

[2]

20 Tx Bias H Warning MSB

[3]

99 Real Time Vcc LSB

[2]

21 Tx Bias H Warning LSB

[3]

100 Real Time Tx Bias MSB

[3]

22 Tx Bias L Warning MSB

[3]

101 Real Time Tx Bias LSB

[3]

23 Tx Bias L Warning LSB

[3]

102 Real Time Tx Power MSB

[4]

24 Tx Pwr H Alarm MSB

[4]

103 Real Time Tx Power LSB

[4]

25 Tx Pwr H Alarm LSB

[4]

Notes:

1. Temperature (Temp) is decoded as a 16 bit signed twos compliment integer in increments of 1/256°C.

2. Supply Voltage (Vcc) is decoded as a 16 bit unsigned integer in increments of 100 μV.

3. Laser bias current (Tx Bias) is decoded as a 16 bit unsigned integer in increments of 2 μA.

4. Transmitted average optical power (Tx Pwr) is decoded as a 16 bit unsigned integer in increments of 0.1 μW.

5. Received average optical power (Rx Pwr) is decoded as a 16 bit unsigned integer in increments of 0.1 μW.

6. Bytes 55-94 are not intended for use with AFCT-57J5ATPZ, but have been set to default values per SFF-8472.

7. Byte 95 is a checksum calculated (per SFF-8472) and stored prior to product shipment.

Table 14. EEPROM Serial ID Memory Contents – Soft Commands (Address A2h, Byte 110)

Status/

Bit # Control Name Description Notes

7 TX_ DISABLE State Digital state of SFP TX_ DISABLE Input Pin (1 = TX_DISABLE asserted) Note 1

6 Soft TX_ DISABLE Read/write bit for changing digital state of TX_DISABLE function Note 1, 2

5 Reserved

4 Reserved

3 Reserved

2 TX_FAULT State Digital state of the SFP TX_FAULT output pin (1 = TX_FAULT asserted) Note 1

1 RX_LOS State Digital state of the SFP RX_LOS output pin (1 = RX_LOS asserted) Note 1

0 Data Ready (Bar) Indicates transceiver is powered and real time sense data is ready. (0 = Ready) Note 1

Notes:

1. The response time for soft commands of the AFCT-57J5ATPZ is 100 msec as speci ed by the MSA SFF-8472.

2. Bit 6 is logic OR’d with the SFP TX_DISABLE input pin 3 ... either asserted will disable the SFP transmitter.

Table 15. EEPROM Serial ID Memory Contents – Alarms and Warnings (Address A2h, Bytes 112, 113, 116, 117)

Byte Bit Flag Bit Name Description

112 7 Temp High Alarm Set when transceiver internal temperature exceeds high alarm threshold

6 Temp Low Alarm Set when transceiver internal temperature exceeds low alarm threshold

5 Vcc High Alarm Set when transceiver internal supply voltage exceeds high alarm threshold

4 Vcc Low Alarm Set when transceiver internal supply voltage exceeds low alarm threshold

3 Tx Bias High Alarm Set when transceiver laser bias current exceeds high alarm threshold

2 Tx Bias Low Alarm Set when transceiver laser bias current exceeds low alarm threshold

1 Tx Power High Alarm Set when transmitted average optical power exceeds high alarm threshold

0 Tx Power Low Alarm Set when transmitted average optical power exceeds low alarm threshold

113 7 Rx Power High Alarm Set when received optical power exceeds high alarm threshold

6 Rx Power Low Alarm Set when received optical power exceeds low alarm threshold

0-5 Reserved

116 7 Temp High Warning Set when transceiver internal temperature exceeds high warning threshold

6 Temp Low Warning Set when transceiver internal temperature exceeds low warning threshold

5 Vcc High Warning Set when transceiver internal supply voltage exceeds high warning threshold

4 Vcc Low Warning Set when transceiver internal supply voltage exceeds low warning threshold

3 Tx Bias High Warning Set when transceiver laser bias current exceeds high warning threshold

2 Tx Bias Low Warning Set when transceiver laser bias current exceeds low warning threshold

1 Tx Power High Warning Set when transmitted average optical power exceeds high warning threshold

0 Tx Power Low Warning Set when transmitted average optical power exceeds low warning threshold

117 7 Rx Power High Warning Set when received optical power exceeds high warning threshold

6 Rx Power Low Warning Set when received optical power exceeds low warning threshold

0-5 Reserved

P1-P3 P4-P6 P7-P9 P10-P12 P13-P15 P16-P18

AFCT-57J5ATPZ

Mfr. #:

Buy AFCT-57J5ATPZ

Manufacturer:

Broadcom / Avago

Description:

Fiber Optic Transmitters, Receivers, Transceivers SM BTS DFB SFP Ind-Temp RoHS

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

AFCT-57J5ATPZ