Type 12 Mild Steel Miniature Pushbutton Enclosures
MPB Series
Application
Designed to accept 22mm miniature oil tight pushbuttons, switches and
pilot lights.
Provides protection from dirt, dust, oil and water.
Standards
UL 508 Type 12 and 13
CSA Type 12 and 13
Complies with
NEMA Type 12 and 13
JIC EMP-1-1967
JIC EGP-1-1967
IEC 60529, IP54
Appropriate components are required to maintain these standards.
Construction
Formed 14 gauge steel except the MPB1 which is 16 gauge.
Smooth continuously welded seams.
Welded brackets provide for enclosure mounting.
Captive cover screws thread into sealed wells.
Larger enclosures provide internally hinged removable covers, designed to
hold the cover open during wiring (see table).
Oil resistant gasket and adhesive.
A bonding stud is provided on the door and a grounding stud is provided on
the enclosure.
Finish
Cover and enclosure are phosphatized and finished in ANSI 61 gray powder
coating.
Accessories
Quality Products. Service Excellence.
