OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ICS307G-03

P1-P3P4-P6P7-P9P10-P12P13-P13
ICS307-03
SERIALLY PROGRAMMABLE CLOCK SOURCE SER PROG CLOCK SYNTHESIZER
IDT™ / ICS™
SERIALLY PROGRAMMABLE CLOCK SOURCE 10
ICS307-03 REV H 071708
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the ICS307-03. These ratings, which are
standard values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these
or any other conditions above those indicated in the operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended periods can affect product reliability.
Electrical parameters are guaranteed only over the recommended operating temperature range.
Recommended Operating Conditions
DC Electrical Characteristics
VDD=3.3 V ±0.3 V, Ambient temperature 0 to +70° C, unless stated otherwise
Item Rating
Supply Voltage, VDD 5 V
All Inputs and Outputs -0.5 V to VDD+0.5 V
Storage Temperature -65 to +150° C
Soldering Temperature 260° C
Parameter Min. Typ. Max. Units
Ambient Operating Temperature 0 +70 ° C
Power Supply Voltage (measured in respect to GND) +3.0 +3.6 V
Parameter Symbol Conditions Min. Typ. Max. Units
Operating Voltage VDD 3.0 3.6 V
Input High Voltage V
IH
2V
Input Low Voltage V
IL
0.8 V
Output High Voltage V
OH
I
OH
= -4 mA 2.4 V
Output Low Voltage V
OL
I
OL
= 4 mA 0.4 V
Output High Voltage,
CMOS level
V
OH
I
OH
= -6.5 mA VDD-0.4 V
Tri-state Output Leakage 1 µA
Operating Supply Current IDD 27 MHz crystal
No load, 100 MHz out,
all outputs enabled
24 mA
Short Circuit Current CLK outputs ±60 mA
Input Capacitance C
IN
4pF
On-Chip Pull-up Resistor R
PU
240 kΩ
On-Chip Pull-down
Resistor
R
PD
100 kΩ
ICS307-03
SERIALLY PROGRAMMABLE CLOCK SOURCE SER PROG CLOCK SYNTHESIZER
IDT™ / ICS™
SERIALLY PROGRAMMABLE CLOCK SOURCE 11
ICS307-03 REV H 071708
AC Electrical Characteristics
VDD = 3.3 V ±0.3 V, Ambient Temperature 0 to +70° C, unless stated otherwise
Note 1: Measured with 15 pF load.
Note 2: Jitter performance will change depending on configuration settings.
Parameter Symbol Conditions Min. Typ. Max. Units
Input Frequency F
IN
Fundamental crystal 3 27 MHz
Clock 0.1 300 MHz
Clock Output Frequency F
OUT
5 pF load 0.0002 270 MHz
15 pF load 0.0002 200 MHz
Output Clock Rise/Fall Time t
R,
t
F
20 to 80% (5 pF load) 1.5 ns
Output Clock Duty Cycle Output Divides <> 3 45 49-51 55 %
Output Divide = 3 40 60 %
Frequency Transition time STROBE high to CLK
out
310ms
One Sigma Clock Period Jitter Note 2 50 ps
Maximum Absolute Jitter t
ja
Deviation from mean,
Note 2
±120 ps
VCO Frequency VCO
F
100 730 MHz
Divider 1 Input Output divider 1 = 2
(5 pF load)
540 MHz
Output divider 1 = 2
(15 pF load)
400 MHz
Output divider 1 = 3
(5 pF load)
720 MHz
Output divider 1 = 3
(15 pF load)
600 MHz
Output divider 1 = 38
~ 1029
570 MHz
All other Output
Divider 1 values
730 MHz
Divider 2 and 3 Inputs Output divider 2, 3 = 2
(5 pF load)
540 MHz
Output divider 2, 3 = 2
(15 pF load)
400 MHz
Output divider 2, 3=12 440 MHz
Output divider 2, 3 =
16, 24, 28 and 32
500 MHz
All other Output
Divider 2 & 3 values
730 MHz
ICS307-03
SERIALLY PROGRAMMABLE CLOCK SOURCE SER PROG CLOCK SYNTHESIZER
IDT™ / ICS™
SERIALLY PROGRAMMABLE CLOCK SOURCE 12
ICS307-03 REV H 071708
Package Outline and Package Dimensions (16-pin TSSOP, 4.40 mm Body, 0.65 mm Pitch)
Package dimensions are kept current with JEDEC Publication No. 95
, MO-153
Ordering Information
Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.
While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology (IDT) assumes
no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No
other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications
such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not
recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT
does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.
Part / Order Number Marking Shipping packaging Package Temperature
307G-03 307G-03 Tubes 16-pin TSSOP 0 to +70° C
307G-03T 307G-03 Tape and Reel 16-pin TSSOP 0 to +70° C
307G-03LF 307G03LF Tubes 16-pin TSSOP 0 to +70° C
307G-03LFT 307G03LF Tape and Reel 16-pin TSSOP 0 to +70° C
307GI-03 307GI-03 Tubes 16-pin TSSOP -40 to +85° C
307GI-03T 307GI-03 Tape and Reel 16-pin TSSOP -40 to +85° C
307GI-03LF 307GI03L Tubes 16-pin TSSOP -40 to +85° C
307GI-03LFT 307GI03L Tape and Reel 16-pin TSSOP -40 to +85° C
INDEX
AREA
1 2
16
D
E1
E
SEATING
PLANE
A
1
A
A
2
e
- C -
b
aaa C
c
L
*For reference only. Controlling dimensions in mm.
Millimeters Inches*
Symbol Min Max Min Max
A--1.20--0.047
A1 0.05 0.15 0.002 0.006
A2 0.80 1.05 0.032 0.041
b 0.19 0.30 0.007 0.012
C 0.09 0.20 0.0035 0.008
D 4.90 5.1 0.193 0.201
E 6.40 BASIC 0.252 BASIC
E1 4.30 4.50 0.169 0.177
e 0.65 Basic 0.0256 Basic
L 0.45 0.75 0.018 0.030
α 0° 8° 0° 8°
aaa -- 0.10 -- 0.004
P1-P3P4-P6P7-P9P10-P12P13-P13

ICS307G-03

Mfr. #:
Buy ICS307G-03
Manufacturer:
Description:
IC SRL PROGR CLK SOURCE 16-TSSOP
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet