OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HLMP-S201-D0000

P1-P3P4-P6P7-P8
HLMP-S100, HLMP-S201, HLMP-S301,
HLMP-S400, HLMP-S401, HLMP-S501
2 mm x 5 mm Rectangular LED Lamps
Data Sheet
Package Dimensions
Features
•  Rectangular light emitting surface
•  Excellent for ush mounting on panels
•  Choice of ve bright colors
•  Long life: solid state reliability
•  Excellent uniformity of light output
Description
The HLMP-S100, -S201, -S301, -S400, -S401, -S501,
are epoxy encap su lated lamps in rectangular
packages which are easily stacked in arrays or used
for discrete front panel indicators. Contrast and
light uniformity are enhanced by a special epoxy diusion
and tinting process.
The HLMP-S100 uses double heterojunction (DH)
absorbing substrate (AS) aluminum gallium arsenide
(AlGaAs) LEDs to produce outstanding light output over a
wide range of drive currents.
2.41 (0.100)
2.03 (0.085)
2.23 (0.088)
1.98 (0.078)
8.00 (0.315)
7.37 (0.290)
25.40 (1.00) MIN.
CATHODE LEAD
BOTTOM VIEW
SIDE VIEW
1.27 (0.50)
NOMINAL
NOTES:
1. ALL DIMENSIONS ARE IN
MILLIMETERS (INCHES).
2. AN EPOXY MENISCUS MAY EXTEND
ABOUT 1 mm (0.040") DOWN THE LEADS.
3. THERE IS A MXIMUM 1 TAPER FROM
BASE TO THE TOP OF LAMP.
2.54 (0.100)
NOMINAL
0.46 (0.018)
SQ. NOMINAL
5.46 (0.215)
4.95 (0.195)
5.18 (0.204)
4.93 (0.194)
2
Selection Guide
Color Part Number
Luminous Intensity Iv (mcd) at 20 mA
[1]
Min. Typ. Max.
AlGaAs Red HLMP-S100 3.8 7.5 –
HER HLMP-S201 3.8 7.5 –
HLMP-S201-D00xx 2.4 3.5 –
Orange HLMP-S400 2.4 3.5 –
HLMP-S401 3.8 7.5 –
Yellow HLMP-S301 2.5 4.0 –
HLMP-S301-B00xx 1.6 2.1 –
HLMP-S301-C00xx 2.5 4.0 –
Green HLMP-S501 4.7 8.0 –
HLMP-S501-C00xx 2.9 4.0 –
HLMP-S501-D00xx 4.7 8.0 –
Note 1. Maximum tolerance for each bin limit is ± 18%.
Part Numbering System
HLMP - S x xx - x x x xx
Mechanical Option
00: Bulk
02: Tape & Reel, Straight Leads
Color Bin Options
0: Full Color Bin Distribution
Maximum Iv Bin Options
0: Open (no max. limit)
Others: Please refer to the Iv Bin Table
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Brightness Level
00: Less Brightness
01: Higher Brightness
Color Options
1: AlGaAs Red
2: GaP HER
3: GaP Yellow
4: GaP Orange
5: GaP Green
3
Electrical/Optical Characteristics at T
A
= 25°C
Sym. Description Device HLMP- Min. Typ. Max. Units Test Conditions
2q
1/2
Included Angle Between Half All 110 Deg. I
F
= 20 mA
Luminous Intensity Points See Note 1
l
PEAK
Peak Wavelength AlGaAs Red 645 nm Measurement at Peak
High Eciency Red 635
Orange 600
Yellow 583
Green 565
l
d
Dominant Wavelength AlGaAs Red 637 nm See Note 2
High Eciency Red 626 Time const, e
-t/ts
Orange 602
Yellow 585
Green 569
t
s
Speed of Response AlGaAs Red 30 ns
High Eciency Red 90
Orange 280
Yellow 90
Green 500
C Capacitance AlGaAs Red 30 pF V
F
= 0; f = 1 MHz
High Eciency Red 11
Orange 4
Yellow 15
Green 18
Rq
J-PIN
Thermal Resistance All 260 °C/W Junction to Cathode
Lead at Seating Plane
V
F
Forward Voltage AlGaAs Red 1.6 1.8 2.2 V I
F
= 20 mA
HER/Orange 1.5 1.9 2.6
Yellow 1.5 2.1 2.6
Green 1.5 2.2 3.0
V
R
Reverse Breakdown Voltage All 5.0 V I
R
= 100 mA
h
V
Luminous Ecacy AlGaAs Red 80
High Eciency Red 145
Orange 380 lumens/ See Note 3
Yellow 500 watt
Green 595
Notes:
1. q
1/2
is the o-axis angle at which the luminous intensity is half the axial luminous intensity.
2. The dominant wavelength, l
d
, is derived from the CIE chromaticity diagram and represents the single wavelength which denes the color of the
device.
3. Radiant intensity, I
e
, in watts/steradian, may be found from the equation I
e
= I
v
/h
v
, where I
v
is the luminous intensity in candelas and h
v
is the
luminous ecacy in lumens/watt.
P1-P3P4-P6P7-P8

HLMP-S201-D0000

Mfr. #:
Buy HLMP-S201-D0000
Manufacturer:
Broadcom / Avago
Description:
Standard LEDs - Through Hole Red Diffused 645nm 6.5mcd
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet