OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MC10H645FN

P1-P3P4-P6
MC10H645
www.onsemi.com
4
Table 7. AC CHARACTERISTICS (VT = VE = 5.0 V ±5%)
0°C 25°C 85°C
Symbol Characteristic Min Max Min Max Min Max Unit Condition
t
PLH
Propagation Delay
D
0
to Output Only
Q0−Q8 4.8 5.8 4.8 5.8 5.2 6.2 ns CL = 50 pF
t
PLH
Propagation Delay
D
1
to Output
4.8 5.8 4.8 5.8 5.2 6.2 ns
t
PHL
Propagation Delay
D
0
to Output
D
1
to Output
4.8
4.8
5.8
5.8
4.8
4.8
5.8
5.8
5.2
5.2
6.2
6.2
ns
t
skpp
Part−to−Part Skew
D
0
to Output Only
1.0 1.0 1.0 ns
t
skwd
* Within−Device Skew
D
0
to Output Only
0.65 0.65 0.65 ns
t
PLH
Propagation Delay
SEL to Q
Q0−Q8 4.5 6.5 5.0 7.0 5.2 7.2 ns CL = 50 pF
t
r
t
f
Output Rise/Fall Time
0.8V to 2.0V
Q0−Q8 0.5
0.5
2.5
2.5
0.5
0.5
2.5
2.5
0.5
0.5
2.5
2.5
ns CL = 50 pF
t
S
Setup Time
SEL to D
1.0 1.0 1.0
ns
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm.
*Within−Device Skew defined as identical transitions on similar paths through a device.
Table 8. DUTY CYCLE SPECIFICATIONS (0°C ≤ T
A
≤ 85°C; Duty Cycle Measured Relative to 1.5 V)
Symbol
Characteristic Min Nom Max Unit Condition
PW Range of V
CC
and CL to Meet Min Pulse
Width (HIGH or LOW) at f
out
≤50MHz
V
CC
CL
PW
4.875
10.0
9.0
5.0 5.125
50.0
11.0
V
pF
ns
All Outputs
ORDERING INFORMATION
Device Package Shipping
†
MC10H645FNG PLCC−28
(Pb−Free)
37 Units / Rail
MC10H645FNR2G PLCC−28
(Pb−Free)
500 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
MC10H645
www.onsemi.com
5
PACKAGE DIMENSIONS
PLCC−28
FN SUFFIX
CASE 776−02
ISSUE E
−N−
−M−
−L−
V
W
D
D
Y BRK
28 1
VIEW S
S
L-M
S
0.010 (0.250) N
S
T
S
L-M
M
0.007 (0.180) N
S
T
0.004 (0.100)
G1
G
J
C
Z
R
E
A
SEATING
PLANE
S
L-M
M
0.007 (0.180) N
S
T
−T−
B
S
L-M
S
0.010 (0.250) N
S
T
S
L-M
M
0.007 (0.180) N
S
T
U
S
L-M
M
0.007 (0.180) N
S
T
Z
G1X
VIEW D−D
S
L-M
M
0.007 (0.180) N
S
T
K1
VIEW S
H
K
F
S
L-M
M
0.007 (0.180) N
S
T
NOTES:
1. DATUMS -L-, -M-, AND -N- DETERMINED
WHERE TOP OF LEAD SHOULDER EXITS
PLASTIC BODY AT MOLD PARTING LINE.
2. DIMENSION G1, TRUE POSITION TO BE
MEASURED AT DATUM -T-, SEATING PLANE.
3. DIMENSIONS R AND U DO NOT INCLUDE
MOLD FLASH. ALLOWABLE MOLD FLASH IS
0.010 (0.250) PER SIDE.
4. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
5. CONTROLLING DIMENSION: INCH.
6. THE PACKAGE TOP MAY BE SMALLER THAN
THE PACKAGE BOTTOM BY UP TO 0.012
(0.300). DIMENSIONS R AND U ARE
DETERMINED AT THE OUTERMOST
EXTREMES OF THE PLASTIC BODY
EXCLUSIVE OF MOLD FLASH, TIE BAR
BURRS, GATE BURRS AND INTERLEAD
FLASH, BUT INCLUDING ANY MISMATCH
BETWEEN THE TOP AND BOTTOM OF THE
PLASTIC BODY.
7. DIMENSION H DOES NOT INCLUDE DAMBAR
PROTRUSION OR INTRUSION. THE DAMBAR
PROTRUSION(S) SHALL NOT CAUSE THE H
DIMENSION TO BE GREATER THAN 0.037
(0.940). THE DAMBAR INTRUSION(S) SHALL
NOT CAUSE THE H DIMENSION TO BE
SMALLER THAN 0.025 (0.635).
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A 0.485 0.495 12.32 12.57
B 0.485 0.495 12.32 12.57
C 0.165 0.180 4.20 4.57
E 0.090 0.110 2.29 2.79
F 0.013 0.021 0.33 0.53
G 0.050 BSC 1.27 BSC
H 0.026 0.032 0.66 0.81
J 0.020 --- 0.51 ---
K 0.025 --- 0.64 ---
R 0.450 0.456 11.43 11.58
U 0.450 0.456 11.43 11.58
V 0.042 0.048 1.07 1.21
W 0.042 0.048 1.07 1.21
X 0.042 0.056 1.07 1.42
Y --- 0.020 --- 0.50
Z 2 10 2 10
G1 0.410 0.430 10.42 10.92
K1 0.040 --- 1.02 ---
__ __
MC10H645
www.onsemi.com
6
P
UBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
MC10H645/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your loc
al
Sales Representative
ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended,
or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable
copyright laws and is not for resale in any manner.
P1-P3P4-P6

MC10H645FN

Mfr. #:
Buy MC10H645FN
Manufacturer:
ON Semiconductor
Description:
Clock Drivers & Distribution 1:9 TTL Clock Driver
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet