NORITAKE ITRON VFD MODULES 2x16, 5mm Dot Character
CHARACTER FONT
5X7 Dot Character VFD Module CU16025ECPB-W6J
!
2 X 16 Characters 5mm High
!
LCD Compatible Design
!
Operating Temp -40°
°°
°C to +85°
°°
°C
!
Single 5V Supply with Power Save Mode
!
High Brightness Blue Green Display
!
Selectable 4/8 bit M68/i80 Interface
!
ASCII + Extended Character Font
!
8 User Definable Character RAM
!
4 Level Brightness Control Function
The module includes the Vacuum Fluorescent Display
glass, driver and micro-controller ICs with refresh RAM,
character generator and interface logic.
The high speed 8 bit parallel interface is 5V CMOS
compatible suitable for connection to a host CPU bus
which can be set to M68 or i80 series interface by a solder
link on the module. Brightness control and power down
functions are provided. A full data sheet is available.
ELECTRICAL SPECIFICATION
Parameter Symbol Value Condition
Power Supply Voltage V
CC
5.0VDC +/- 5% G
ND
=0V
Power Supply Current I
CC
150mADC typ. Vcc=5V
Logic High Input V
IH
2.0VDC min. V
CC
=5V
Logic Low Input V
IL
0.8VDC max. V
CC
=5V
Logic High Output V
OH
Vcc-0.4VDC min. I
OH
= -1.6mA
Logic Low Output V
OL
0.4VDC max. I
OH
=1.6mA
The power on rise time should be less than 50ms.The inrush current at power on can be 2 x ICC.
The Icc current is 10mA maximum while in power down mode.
OPTICAL and ENVIRONMENTAL SPECIFICATIONS
Parameter Value
Character Size/Pitch (XxY mm) 2.46 x 4.76/3.26 x 6.01
Dot Size/Pitch (XxY mm) 0.38 x 0.56/0.52 x 0.7
Luminance 700 cd/m
2
(204 fL) Typ.
Colour of Illumination Blue-Green (Filter for more colours)
Operating Temperature
-40°C to +85°C
Storage Temperature
-50°C to +85°C
Operating Humidity (non condensing)
20 to 80% RH @ 25°C
SOFTWARE COMMANDS PIN CONNECTIONS
Instruction R/W RSD0-D7 Pin Sig Pin Sig
Clear Display L L 01H 1 G
ND
2V
CC
Cursor Return Home L L 02H-03H 3 (F
NC
)4 RS
Entry Mode Set L L 04H-07H 5 R/W # 6 E #
Display ON/OFF L L 08H-0FH 7 DB0 8 DB1
Cursor/Display Shift L L 10H-1FH 9 DB2 10 DB3
Function Set L L
0H-3FH 11 DB4 12 DB5
Brightness Set L H 00H-03H 13 DB6 14 DB7
Set CG RAM Addr. L L
0H-7FH
Set DD RAM Addr. L L 80H-E7H
TIMING PARAMETERS
(min
)
Read BUSY/Addr. H L 00H-FFH (E)nable Cycle Time 1000ns
Write Data to RAM L H 00H-FFH (E)nable Pulse Width 450ns
Read Data from RAM H H 00H-FFH Hold after (E)nable 10ns
JUMPER LINKS
# Interface M68/i80
When jumper link JP2 is
soldered, these inputs
change to i80 series CPU
control lines.
Pin 5= /WR Pin 6 = /RD
Pin 3 (Fnc) Input
This is normally open circuit.
If pads JP1.1 and JP1.2 are
linked. Pin 3 = /Reset.
8.10
1.6
5.1
14 x ∅ 1.0
51.36
75.0
80.0
11.4
31.0
36.0
12.9
11.82
2.5
2.5
114
Dimensions in mm & subject to tolerances. Mounting holes 2.5mm dia.
CONTACT
Noritake Sales Office Tel Nos
Nagoya Japan: +81 (0)52-561-9867
Canada: +1-416-291-2946
Chicago USA: +1-847-439-9020
Munchen (D): +49 (0)89-3214-290
Itron UK: +44 (0)1493 601144
Rest Europe: +49 (0)61-0520-9220
-
Subject to change without notice
