SPECIFICATION
NSD10-12D5 NSD10-12D12 NSD10-12D15 NSD10-48D5 NSD10-48D12 NSD10-48D15
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT
LINE REGULATION
LOAD REGULATION
VOLTAGE RANGE
EFFICIENCY (Typ.)
INPUT
SHUTDOWN IDLE CURRENT
SAFETY STANDARDS
WORKING TEMP.
ON/OFF CONTROL
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
MTBF
DIMENSIONOTHERS
NOTE
PACKING
OVERLOAD
OVER VOLTAGE(CLAMP)
DC CURRENT
5V -5V -12V -15V -5V -12V -15V12V 15V 5V 12V 15V
1A 1A 0.42A 0.33A 1A 0.42A 0.33A0.42A 0.33A 1A 0.42A 0.33A
0.05 ~ 1A 0.05 ~ 1A 0.05 ~ 1A
0.02 ~ 0.42A 0.02 ~ 0.42A
0.016 ~ 0.33A 0.016 ~ 0.33A
0.05 ~ 1A
0.02 ~ 0.42A 0.02 ~ 0.42A
0.016 ~ 0.33A 0.016 ~ 0.33A
10W 10W10.08W 10.08W9.9W 9.9W
75mVp-p(10% ~ 100% load)
±4.0%
±3.0%
±2.5%
±2.0%
±2.5%
±1.0%
±3.0%
±2.0%
±2.5%
±2.0%
±2.5%
±1.0%
±1.0%
9.8 ~ 36VDC 22 ~ 72VDC
48VDC
76%
1.4A/12VDC 0.4A/48VDC
20mA/12VDC
Above 105% rated output power
Protection type : Over power limiting, recovers automatically after fault condition is removed
Recovers automatically after fault condition is removed
-25 ~ +70℃
Logic "1" OPEN: ON logic "0" GND: OFF
0% ~ 95% RH max.
-40 ~ +85 , 0 ~ 95% RH℃
±℃℃0.03%/ (0~60 )
50.8*25.4*10mm (2"*1"*0.394") (L*W*H)
0.02Kg; 300pcs/7Kg/0.97CUFT
77% 77% 78% 77% 77%
1. All parameters NOT specially mentioned are measured at 12, 48VDC input, rated load and 25 of ambient temperature.℃
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Short circuit not more than 60 seconds.
5. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
a mm* mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives.230 230 For guidance on how to
perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com)
6. To insure proper operation, a 220uF/100V electrolytic capacitor with Esr <1 must be added to the input line.Ω
7. EMC filter suggestion:
8. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃
10W DC-DC Regulated Dual Output
Wide 4:1 DC input range
Protections: Short circuit / Overload / Over voltage
1000VDC I/O isolation
Built-in EMI filter
Cooling by free air convection
Built-in remote ON-OFF control
100% full load burn-in test
Lost cost
High reliability
2 years warranty
■
Features :
NSD10-D series
RIPPLE & NOISE (max.) Note.2
VOLTAGE TOLERANCE Note.3
ISOLATION VOLTAGE
ISOLATION RESISTANCE
I/P-O/P:1KVDC
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH℃
ENVIRONMENT
PROTECTION
FUNCTION
RATED DC INPUT 12VDC
SHORT CIRCUIT
Note.4
5.75 ~ 7.5V -5.75 ~ -7.5V -5.75 ~ -7.5V
13.8 ~ 18V 13.8 ~ 18V
-13.8 ~ -18V -13.8 ~ -18V
17.3 ~ 22.5V 17.3 ~ 22.5V
-17.3 ~ -22.5V -17.3 ~ -22.5V
5.75 ~ 7.5V
1878.5K hrs min. MIL-HDBK-217F (25 )℃
Compliance to EN55032 (CISPR32) Class B, EAC TP TC 020
Compliance to EN61000-4-2,3,4,6,8; EN55024, light industry level, criteria A, EAC TP TC 020
SAFETY &
EMC
(Note 5)
UL60950-1 approved, Design refer to TUV EN60950-1, EAC TP TC 004
PSU
+
-
Vin
+
-
Vo
80uH
680uF
+
CAPACITIVE LOAD (max.) ±1000uF
EMC IMMUNITY
EMC EMISSION
SETUP TIME
100ms RATED DC INPUT at full Load/
File Name:NSD10-D-SPEC 2018-01-12
