G3VM-61FR

360 MOS FET Relays G3VM-61CR/FR
MOS FET Relays
G3VM-61CR/FR
New High-capacity MOS FET Relay Allowing
Switching of a 2-A Continuous Load Current
• Package designed with 1 channel and 8 pins.
• Low ON-resistance of 0.12 max.
Leakage current of 1.0 nA (typical) between output terminals
when they are open.
• RoHS Compliant.
Application Examples
Semiconductor testers
Measurement devices
Security systems
Note: The actual product is marked differently from the image shown
here.
Approval pending
List of Models
Dimensions
Note: All units are in millimeters unless otherwise indicated.
Terminal Arrangement/Internal Connections (Top View)
PCB Dimensions (Bottom View) Actual Mounting Pad Dimensions
(Recommended Value, Top View)
Contact form Terminals Load voltage (peak value) Model Number per stick Number per tape
SPST-NO PCB terminals 60 VAC G3VM-61CR 50 ---
Surface-mounting
terminals
G3VM-61FR
G3VM-61FR(TR) --- 1,500
9.66±
0.25
6.4±
0.25
2.54±
0.25
1.2±
0.15
0.5±
0.1
0.8±
0.25
7.62±
0.25
7.85 to 8.80
2.5 min.
3.65
+0.15
0.25
0.25
+0.1
0.05
9.66±
0.25
6.4±
0.25
2.54±
0.25
1.2±
0.15
7.62±
0.25
10.0 max.
1.0 min.
1.0
min.
3.65
+0.15
0.25
4.0
+0.25
0.2
G3VM-61CR
G3VM-61FR
Note: The actual product
is marked different-
ly from the image
shown here.
Note: The actual product
is marked different-
ly from the image
shown here.
Weight: 0.54 g
Weight: 0.54 g
8765
3
421
8765
3
421
G3VM-61CR
G3VM-61FR
Six 0.8-dia. holes
2.54
2.54
(0.61)
(0.61)
(1.52)
(1.52)
G3VM-61CR
8.3 to 8.8
2.54
1.5
1.3
G3VM-61FR
MOS FET Relays G3VM-61CR/FR 361
Absolute Maximum Ratings (Ta = 25°C)
Electrical Characteristics (Ta = 25°C)
Recommended Operating Conditions
Use the G3VM under the following conditions so that the Relay will operate properly.
Engineering Data
Load Current vs. Ambient Temperature
G3VM-61CR(FR)
Item Symbol Rating Unit Measurement conditions
Input LED forward current I
F
50 mA
Repetitive peak LED forward
current
I
FP
1 A 100 µs
pulses, 100 pps
LED forward current reduction
rate
I
F
/°C 0.5 mA/°CTa 25°C
LED reverse voltage V
R
6V
Connection temperature T
j
125 °C
Output Output dielectric strength V
OFF
60 V
Continuous load current I
O
2,000 mA
ON current reduction rate I
ON
/°C 20 mA/°CTa 25°C
Connection temperature T
j
125 °C
Dielectric strength between input and
output (See note 1.)
V
I-O
1,500 Vrms AC for 1 min
Operating temperature T
a
20 to +85 °C With no icing or condensation
Storage temperature T
stg
55 to +125 °C With no icing or condensation
Soldering temperature (10 s) --- 260 °C10 s
Note: 1. The dielectric strength between the input and
output was checked by applying voltage be-
tween all pins as a group on the LED side and
all pins as a group on the light-receiving side.
Item Symbol Mini-
mum
Typical Maxi-
mum
Unit Measurement
conditions
Input LED forward voltage V
F
1.0 1.2 1.4 V I
F
= 20 mA
Reverse current I
R
--- --- 10 µAV
R
= 6 V
Capacity between terminals C
T
--- 15 --- pF V = 0, f = 1 MHz
Trigger LED forward current I
FT
--- --- 5 mA I
O
= 1 A
Output Maximum resistance with output
ON
R
ON
--- --- 0.12 I
F
= 10 mA,
I
O
= 1 A
Current leakage when the relay is
open
I
LEAK
--- 1.0 4.0 nA V
OFF
= 20 V
Ta = 50°C
Capacity between I/O terminals C
I-O
--- 0.8 --- pF f = 1 MHz, Vs = 0 V
Insulation resistance R
I-O
1,000 --- --- M V
I-O
= 500 VDC,
RoH 60%
Turn-ON time tON --- --- 5.0 ms I
F
= 10 mA, R
L
= 200 Ω,
V
DD
= 20 V (See note 2.)
Turn-OFF time tOFF --- --- 3.0 ms
10%
90%
VOUT
IF
tON tOFF
IF
2
3
8
5
RL
VDD
VOUT
Note: 2. Turn-ON and Turn-OFF
Times
Item Symbol Minimum Typical Maximum Unit
Output dielectric strength V
DD
--- --- 48 V
Operating LED forward current I
F
10 --- 30 mA
Continuous load current I
O
--- --- 2 A
Operating temperature T
a
25 --- 50 °C
Ambient temperature (°C)
Load current (mA)
2,500
2,000
1,500
1,000
500
0
20 0 20 40 60 80 100
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed
part of all quotations, acknowledgments, invoices, purchase orders and other
documents, whether electronic or in writing, relating to the sale of products or
services (collectively, the "Products") by Omron Electronic Components LLC
("Seller"). Seller hereby objects to any terms or conditions proposed in
Buyer's purchase order or other documents which are inconsistent with, or in
addition to, these Terms.
2. Prices; Payment. All prices stated are current, subject to change without
notice by Seller. Buyer agrees to pay the price in effect at time of shipment.
Payments for Products received are due net 30 days unless otherwise stated
in the invoice.
3. Discounts. Cash discounts, if any, will apply only on the net amount of
invoices sent to Buyer after deducting transportation charges, taxes and
duties, and will be allowed only if (i) the invoice is paid according to Seller's
payment terms and (ii) Buyer has no past due amounts owing to Seller.
4. Currencies. If the prices quoted herein are in a currency other than U.S. dol-
lars, Buyer shall make remittance to Seller at the then current exchange rate
most favorable to Seller and which is available on the due date; provided that if
remittance is not made when due, Buyer will convert the amount to U.S. dol-
lars at the then current exchange rate most favorable to Seller available during
the period between the due date and the date remittance is actually made.
5. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the impor-
tation or sale of the Products.
6. Taxes
. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon,
imposed directly or indirectly on Seller or required to be collected directly or
indirectly by Seller for the manufacture, production, sale, delivery, importation,
consumption or use of the Products sold hereunder (including customs duties
and sales, excise, use, turnover and license taxes) shall be charged to and
remitted by Buyer to Seller.
7. Financial
. If the financial position of Buyer at any time becomes unsatisfactory
to Seller, Seller reserves the right to stop shipments or require satisfactory
security or payment in advance. If Buyer fails to make payment or otherwise
comply with these Terms or any related agreement, Seller may (without liability
and in addition to other remedies) cancel any unshipped portion of Products
sold hereunder and stop any Products in transit until Buyer pays all amounts,
including amounts payable hereunder, whether or not then due, which are
owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Seller fully against all costs or expenses arising in
connection therewith.
9. Force Majeure. Seller shall not be liable for any delay or failure in delivery
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller:
1. Shipments shall be by a carrier selected by Seller;
2. Such carrier shall act as the agent of Buyer and delivery to such carrier
shall constitute delivery to Buyer;
3. All sales and shipments of Products shall be FOB shipping point (unless
otherwise stated in writing by Seller), at which point title to and all risk of
loss of the Products shall pass from Seller to Buyer, provided that Seller
shall retain a security interest in the Products until the full purchase price is
paid by Buyer;
4. Delivery and shipping dates are estimates only.
5. Seller will package Products as it deems proper for protection against
normal handling and extra charges apply to special conditions.
11. Claims
. Any claim by Buyer against Seller for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writing
to Seller within 30 days of receipt of shipment and include the original trans-
portation bill signed by the carrier noting that the carrier received the Products
from Seller in the condition claimed.
12. Warranties
. (a) Exclusive Warranty. Seller's exclusive warranty is that th
e
Products will be free from defects in materials and workmanship for a period
of
twelve months from the date of sale by Seller (or such other period expresse
d
in writing by Seller). Seller disclaims all other warranties, express or implie
d.
(b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATIO
N,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABI
L-
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCT
S.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT TH
E
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THE
IR
INTENDED USE. Seller further disclaims all warranties and responsibility
of
any type for claims or expenses based on infringement by the Products or ot
h-
erwise of any intellectual property right. (c) Buyer Remedy. Seller's sole ob
li-
gation hereunder shall be to replace (in the form originally shipped with Buy
er
responsible for labor charges for removal or replacement thereof) the no
n-
complying Product or, at Seller's election, to repay or credit Buyer an amou
nt
equal to the purchase price of the Product; provided that in no event sh
all
Seller be responsible for warranty, repair, indemnity or any other claims
or
expenses regarding the Products unless Seller's analysis confirms that th
e
Products were properly handled, stored, installed and maintained and not su
b-
ject to contamination, abuse, misuse or inappropriate modification. Return
of
any Products by Buyer must be approved in writing by Seller before shipmen
t.
Seller shall not be liable for the suitability or unsuitability or the results from th
e
use of Products in combination with any electrical or electronic component
s,
circuits, system assemblies, or any other materials or substances or enviro
n-
ments. Any advice, recommendations or information given orally or in writin
g
are not to be construed as an amendment or addition to the above warranty.
13. Limitation on Liability; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIA
L,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS O
F
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CON
-
NECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED
IN
CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further,
in
no event shall liability of Seller exceed the individual price of the Product o
n
which liability is asserted.
14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates an
d
its employees from and against all liabilities, losses, claims, costs an
d
expenses (including attorney's fees and expenses) related to any claim, inve
s-
tigation, litigation or proceeding (whether or not Seller is a party) which arise
s
or is alleged to arise from Buyer's acts or omissions under these Terms or
in
any way with respect to the Products. Without limiting the foregoing, Buyer (
at
its own expense) shall indemnify and hold harmless Seller and defend or sett
le
any action brought against Seller to the extent that it is based on a claim th
at
any Product made to Buyer specifications infringed intellectual property righ
ts
of another party.
15. Property; Confidentiality. The intellectual property embodied in the Products
is
the exclusive property of Seller and its affiliates and Buyer shall not attempt
to
duplicate it in any way without the written permission of Seller. Notwithstan
d-
ing any charges to Buyer for engineering or tooling, all engineering and toolin
g
shall remain the exclusive property of Seller. All information and materials su
p-
plied by Seller to Buyer relating to the Products are confidential and prop
ri-
etary, and Buyer shall limit distribution thereof to its trusted employees an
d
strictly prevent disclosure to any third party.
16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any rig
ht
and no course of dealing between Buyer and Seller shall operate as a waiv
er
of rights by Seller. (b) Assignment. Buyer may not assign its rights hereund
er
without Seller's written consent. (c) Law. These Terms are governed by I
lli-
nois law (without regard to conflict of law principles). Federal and state cour
ts
in Illinois shall have exclusive jurisdiction for any dispute hereunde
r.
(d) Amendment. These Terms constitute the entire agreement between Buy
er
and Seller relating to the Products, and no provision may be changed
or
waived unless in writing signed by the parties. (e) Severability. If any provisio
n
hereof is rendered ineffective or invalid, such provision shall not invalidate an
y
other provision. (f) Setoff. Buyer shall have no right to set off any amoun
ts
against the amount owing in respect of this invoice.. (g) Definitions. As use
d
herein, "including" means "including without limitation".

G3VM-61FR

Mfr. #:
Manufacturer:
Omron Electronics
Description:
Solid State Relays - PCB Mount 60V SPST-NO SMD8 SMT 2000mA .12ohm 1400pF
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet