5
FN9072.9
December 10, 2015
Absolute Maximum Ratings
Supply Voltage (VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15V
Supply Voltage (PVCC) . . . . . . . . . . . . . . . . . . . . . . . . . VCC + 0.3V
BOOT Voltage (V
BOOT
- V
PHASE
) . . . . . . . . . . . . . . . . . . . . . . .15V
Input Voltage (V
PWM
) . . . . . . . . . . . . . . . . . . . . . . GND - 0.3V to 7V
UGATE. . . . . . .V
PHASE
- 5V(<400ns pulse width) to V
BOOT
+ 0.3V
. . . . . . . . . . . .V
PHASE
-0.3V(>400ns pulse width) to V
BOOT
+ 0.3V
LGATE . . . . . . . . . GND - 5V(<400ns pulse width) to V
PVCC
+ 0.3V
. . . . . . . . . . . . . . GND -0.3V(>400ns pulse width) to V
PVCC
+ 0.3V
PHASE. . . . . . . . . . . . . . . . . . GND -5V(<400ns pulse width) to 15V
. . . . . . . . . . . . . . . . . . . . . . .GND -0.3V(>400ns pulse width) to 15V
ESD Rating
Human Body Model (Per MIL-STD-883 Method 3015.7) . . . . .3kV
Machine Model (Per EIAJ ED-4701 Method C-111) . . . . . . . .200V
Thermal Information
Thermal Resistance
JA
(°C/W)
JC
(°C/W)
SOIC Package (Note 3) . . . . . . . . . . . . 97 N/A
EPSOIC Package (Note 4). . . . . . . . . . 38 N/A
QFN Package (Notes 4, 5). . . . . . . . . . 48 10
Maximum Junction Temperature (Plastic Package) . . . . . . . . 150°C
Maximum Storage Temperature Range . . . . . . . . . . . -65°C to 150°C
Pb-Free Reflow Profile. . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
For Recommended soldering conditions see Tech Brief TB389.
Operating Conditions
Ambient Temperature Range. . . . . . . . . . . . . . . . . . . . . 0°C to 85°C
Maximum Operating Junction Temperature. . . . . . . . . . . . . . 125°C
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12V 10%
Supply Voltage Range, PVCC . . . . . . . . . . . . . . . . . . . . . 5V to 12V
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTES:
3.
JA
is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
4.
JA
is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See
Tech Brief TB379.
5. For
JC
, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications Recommended Operating Conditions, Unless Otherwise Noted. Boldface limits apply over the operating
temperature range, 0°C to +85°C
PARAMETER SYMBOL TEST CONDITIONS
MIN
(Note 6) TYP
MAX
(Note 6) UNITS
VCC SUPPLY CURRENT
Bias Supply Current I
VCC
HIP6601B, f
PWM
= 1MHz, V
PVCC
= 12V - 4.4 6.2 mA
HIP6603B, f
PWM
= 1MHz, V
PVCC
= 12V - 2.5 3.6 mA
Upper Gate Bias Current I
PVCC
HIP6601B, f
PWM
= 1MHz, V
PVCC
= 12V - 200 430 A
HIP6603B, f
PWM
= 1MHz, V
PVCC
= 12V - 1.8 3.3 mA
POWER-ON RESET
VCC Rising Threshold 9.7 9.95 10.4 V
VCC Falling Threshold 7.3 7.6 8.0 V
PWM INPUT
Input Current I
PWM
V
PWM
= 0V or 5V (See “Block Diagrams” on
page 3)
- 500 - A
PWM Rising Threshold -3.6- V
PWM Falling Threshold -1.45- V
UGATE Rise Time t
RUGATE
V
PVCC
= 12V, 3nF Load - 20 - ns
LGATE Rise Time t
RLGATE
V
PVCC
= 12V, 3nF Load - 50 - ns
UGATE Fall Time t
FUGATE
V
PVCC
= 12V, 3nF Load - 20 - ns
LGATE Fall Time t
FLGATE
V
PVCC
= 12V, 3nF Load - 20 - ns
UGATE Turn-Off Propagation Delay t
PDLUGATE
V
PVCC
= 12V, 3nF Load - 30 - ns
LGATE Turn-Off Propagation Delay t
PDLLGATE
V
PVCC
= 12V, 3nF Load - 20 - ns
Shutdown Window 1.4 - 3.6 V
Shutdown Holdoff Time - 230 - ns
HIP6601B, HIP6603B, HIP6604B
