TL-YS
TL-YS
Precautions
■ EFFECTS OF SURROUNDING METALS
When mounting a proximity sensor flush with a metallic panel,
be sure to provide a minimum distance as shown in the table
to prevent the sensor from being effected by metallic objects
other than the target.
■ MUTUAL INTERFERENCE
To prevent mutual interference, be sure to space the sensors
at a distance greater than that shown in the table below.
Drawing dimension Minimum distance
mm (inch)
A 45 (1.77)
B 45 (1.77)
Drawing dimension Minimum distance
mm (inch)
C 150 (5.91)
D 200 (7.87)
■ INFLUENCE OF PLATING
Metals with different types of plating effect the detecting
distance of inductive proximity sensors. The table at right
shows reference values for the percentage of the rated
detecting distance that may be expected by type of plating
materials.
Type of plating % of detecting distance (of
standard unplated iron target)
Zn 100
Cr 75
Ag 60
Ni 70
Cu 70
OMRON ELECTRONICS LLC OMRON CANADA, INC.
One East Commerce Drive 885 Milner Avenue
Schaumburg, IL 60173 Scarborough, Ontario M1B 5V8
1-800-55-OMRON 416-286-6465
Cat. No. CEDSAX4 11/01 Specifications subject to change without notice. Printed in the U.S.A.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.omron.com/oei
Canada - http://www.omron.com/oci