3059236

https://www.phoenixcontact.com/pi/products/3059236

04/29/2017Page1/4

Bolt connection terminal block-RSC 5-F/8-3059236

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Feed-through terminal block with bolt connection method, cross section: 0.1 - 10 mm², AWG: 26 - 8, width 13

mm, color: gray

Image shows the 4-pos. version

The isolator bridge bar supports switchable cross connections; the bridge screw therefore has the function of a live contact

Bridge shaft for potential distribution using standard screw bridges

Key Commercial Data

Packing unit 1 STK

GTIN

GTIN 4046356534857

Technical data

General

Number of levels 1

Number of connections 16

Degree of pollution 3

https://www.phoenixcontact.com/pi/products/3059236

04/29/2017Page2/4

Bolt connection terminal block-RSC 5-F/8-3059236

Technical data

General

Overvoltage category III

Insulating material group I

Maximum power dissipation for nominal condition 1.82 W

Maximum load current 57 A (with 10 mm² conductor cross section)

Nominal current I

N

Temperature index of insulation material (DIN EN 60216-1 (VDE

0304-21))

130 °C

Static insulating material application in cold -60 °C

Behavior in fire for rail vehicles (DIN 5510-2) Test passed

Flame test method (DIN EN 60695-11-10) V0

Oxygen index (DIN EN ISO 4589-2) >32 %

NF F16-101, NF F10-102 Class I 2

NF F16-101, NF F10-102 Class F 2

Surface flammability NFPA 130 (ASTM E 162) passed

Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3

Dimensions

Width 121.7 mm

Length 53.3 mm

Height 37 mm

Pitch 13 mm

Connection data

Note Connection bolts

Connection method Bolt connection

Connection in acc. with standard IEC 60947-7-1

Max. cross section for cable lug connection 10 mm²

https://www.phoenixcontact.com/pi/products/3059236

04/29/2017Page3/4

Bolt connection terminal block-RSC 5-F/8-3059236

Technical data

Connection data

Hole diameter, min. 5.3 mm

Cable lug width, max. 10 mm

Bolt diameter 5 mm

Cable lug connection according to standard DIN 46237

Min. cross section for cable lug connection 0.5 mm²

Max. cross section for cable lug connection 6 mm²

Hole diameter, min. 5.3 mm

Cable lug width, max. 10 mm

Bolt diameter 5 mm

Screw thread M5

Tightening torque, min 2 Nm

Tightening torque max 2.2 Nm

Standards and Regulations

Approvals

Approvals

UL Recognized / cUL Recognized / EAC / cULus Recognized

Ex Approvals

Approval details

UL Recognized

