DMPH6050SK3Q-13

Product catalogue | Terminals | Screwing technology | W-series modular terminals | Modular terminals with external

spring | Modular feed-through terminals | 4 mm²

- 1 -

General ordering data

Order No. 9537510000

Part designation WDU 4 SL/EN SW

Version Special terminal, special connections, 4 mm²,

Screw connection, PA 66, black, TS 35 + TS 32

Note, technical data Note the max. current of the terminal (41 A) when

using the cross-connector!

Product description Spring below clamping yoke ensures additional

contact stability.

Note, accessories Hook-shaped cable lugs 1-2.5mm² thin

versionorderno. 9036300000 (100 pcs.)

PT OKIECEx/ATEX rating data

EU-type examination certificate SIRA02ATEX3242U

Download, German

IECEx voltage 275 V

IECEx current 28 A

IECEx conductor cross-section 4 mm²

Voltage when using cross-connections CrossConnectionGuide.pdf

Operating temperature range For operating temperature range see EC Design

Test Certificate / IEC Ex-Certificate of Conformity

Marking EN 60079-7 Ex e II

Product catalogue | Terminals | Screwing technology | W-series modular terminals | Modular terminals with external

spring | Modular feed-through terminals | 4 mm²

- 2 -

2 clampable conductors (H05V/H07V) with

equal cross-section (rated connection)

Additional technical data

Colour of insulating material black

Connection direction on side

End plate required Yes

Explosion-tested version "Ex e" No

Installation advice TS 35 + TS 32

Insulating material PA 66

Levels cross-connected internally No

No. of identical terminals 1

Type of mounting Snap-on

UL 94 flammability rating of insulation material V-0

Version Feed-through terminal

CSA rating data

Voltage (CSA) 300 V

CSA current 25 A

Min. cross-section (CSA) AWG 22

Max. cross-section (CSA) AWG 10

Clamping range, min. 0.22 mm²

Clamping range, max. 6 mm²

Type of connection Screw connection

2nd type of connection screwed

Connection direction on side

No. of connections 2

Stripping length 15 mm

Clamping screw M 3

Blade size 0.6 x 3.5 mm

Tightening torque range 0.5...1.0 Nm

Product catalogue | Terminals | Screwing technology | W-series modular terminals | Modular terminals with external

spring | Modular feed-through terminals | 4 mm²

- 3 -

Conductors for clamping (rated connection)

Solid, min. 0.5 mm²

Flexible with ferrule, max. (DIN 46228/1) 4 mm²

AWG conductor size, min. AWG 26

AWG conductor size, max. AWG 10

AWG conductor size, min. 0.13 mm²

AWG conductor size, max. 5.26 mm²

Dimensions

Width 6.1 mm

Height of lowest version 47 mm

Length 60 mm

Rating data

Rated cross-section 4 mm²

Rated voltage 500 V

Rated impulse voltage 6 kV

Rated current 32 A

Standards IEC 60947-7-1

Current with max. conductor 41 A

Pollution severity 3

Approvals

Approvals institutes

ETIM 3.0 EC000897

eClass 4.1 27-14-11-31

eClass 5.0 27-14-11-31