Part Number TCAD002 - Microstick Plus USB Peripheral Board
The Microstick Plus USB board provides the hardware interface for Microchip’s USB libraries and example
code (see http://en.microstickplus.com/usb/prog), allowing for quick and easy development of USB solutions for
Device, Host, or On-The-Go applications. This peripheral board contains three USB connectors: USB Host A,
USB Mini B, and USB Micro AB. In addition, the board contains a push button, configuration switches, and
status LEDs. The Microstick Plus USB board can be used alone with the Microstick II to develop on 28-pin
microcontrollers with built-in USB peripherals—which include devices from both the 16-bit PIC24F family and
the 32-bit PIC32MX2 family. In addition, this board can be connected to the original Microstick Plus
Development Board or to a breadboard via pin headers.
Features:
• USB Mini B connector - for device communication.
• USB Host A connector - for master (Host) communication.
• USB Micro AB connector - for On-The-Go (OTG) communication.
• 1 user push button
• 2 software controlled user LED
• 8 MHz quartz crystal
• 2 configuration switches
• USB over current protection IC (MIC2005A-1YM5) with output enable input pin and over current output
pin
ChipCAD is a trusted third-party tool provider
Page 1 of 1
5
4
201
htt
://www.microchi
direct.com/
roductsearch.as
x?ke
words=TCAD00
