https://www.phoenixcontact.com/us/products/2880150
06.11.2013Page2/5
Surge protection device-D-LAN-19"-12-2880150
Technical data
General
Housing material Sheet steel
Color beige
Standards for air and creepage distances DIN VDE 0110-1
IEC 60664-1
Surge voltage category II
Pollution degree 2
Mounting type 19" rack
Design 19" rack patch module
Number of positions 12
Direction of action
Line-Line & Line-Signal Ground/Shield & Signal Ground/Shield-Earth
Ground
Protective circuit
IEC test classification C1
C2
C3
B3
Maximum continuous voltage UC (wire-wire) 6 V DC
Maximum continuous voltage U
C
(wire-ground)
68 V DC (optional: +/- 6 V DC)
Nominal current I
N
1.5 A (25 °C)
Operating effective current I
C
at U
C
≤ 1 mA
Residual current I
PE
≤ 1 mA (jumper 2 unplugged)
Nominal discharge current I
n
(8/20) µs (Core-Core)
350 A
Nominal discharge current I
n
(8/20) µs (Core-Earth)
350 A
Nominal discharge current I
n
(8/20) µs (Shield-Earth)
2.5 kA (with insulated housing)
Total surge current (8/20) µs 10 kA
Nominal pulse current Ian (10/1000) µs (Core-Core) 100 A
Nominal pulse current Ian (10/1000) µs (Core-Earth) 100 A
Output voltage limitation at 1 kV/µs (Core-Core) static ≤ 20 V
Output voltage limitation at 1 kV/µs (Core-Earth) static ≤ 30 V (J2 plugged)
≤ 170 V (J2 unplugged)
Output voltage limitation at 1 kV/µs (Shield-Earth) static ≤ 700 V (with insulated shield)
Residual voltage at I
n
, (conductor-conductor)
≤ 65 V
Residual voltage at I
n
, (conductor-ground)
≤ 45 V (J2 ON)
≤ 220 V (J2 OFF)
Residual voltage at In, (shield-ground) ≤ 700 V
Voltage protection level U
P
(Core-Core)
≤ 50 V (C1, 500 V/250 A)
