OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

APHBM2012LSURKZGKC

P1-P3P4-P6
SPEC NO: DSAO4526 REV NO: V.2A DATE: SEP/25/2015 PAGE: 1 OF 6
APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1203015150
2.0x1.25mm SMD CHIP LED LAMP
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Part Number: APHBM2012LSURKZGKC
Hyper Red
Green
Features
z 2.0mmx1.25mm SMD LED, 0.45mm max. thickness.
z Bi -color, low power consumption.
z Wide viewing angle.
z Ideal for backlight and indicator.
z Package : 2000pcs / reel.
z Moisture sensitivity level : level 3.
z Low current IF=2mA operating.
z RoHS compliant.
Descriptions
z The Hyper Red source color devices are made with Al
GaInP on GaAs substrate Light Emitting Diode.
z The Green source color devices are made with InGaN
on Sapphire Light Emitting Diode.
z Electrostatic discharge and power surge could damage
the LEDs.
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
z All devices, equipments and machineries must be
electrically grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
RED
GREEN
GREEN
RED
SPEC NO: DSAO4526 REV NO: V.2A DATE: SEP/25/2015 PAGE: 2 OF 6
APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1203015150
Selection Guide
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Emitting Color (Material) Lens Type
Iv (mcd) [2]
@ 2mA
V
iewing
Angle [1]
Min. Typ. 2θ1/2
APHBM2012LSURKZGKC
Hyper Red (AlGaInP)
Water Clear
10 20
120
°
*2 *10
50 90
*50 *90
Green (InGaN)
Symbol Parameter Emitting Color Typ. Max. Units Test Conditions
λpeak Peak Wavelength
Hyper Red
Green
645
515
nm I
F=2mA
λD [1] Dominant Wavelength
Hyper Red
Green
630
525
nm I
F=2mA
Δλ1/2 Spectral Line Half-width
Hyper Red
Green
28
35
nm I
F=2mA
C Capacitance
Hyper Red
Green
35
45
pF V
F=0V;f=1MHz
V
F [2] Forward Voltage
Hyper Red
Green
1.75
2.65
2.1
3.1
V I
F=2mA
I
R Reverse Current
Hyper Red
Green
10
50
uA V
R = 5V
Min.
1.5
2.2
Parameter Hyper Red Green Units
Power dissipation 63 77.5 mW
DC Forward Current 30 25 mA
Peak Forward Current [1] 185 150 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
Electrostatic Discharge Threshold (HBM) 3000 V 450
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
SPEC NO: DSAO4526 REV NO: V.2A DATE: SEP/25/2015 PAGE: 3 OF 6
APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1203015150
APHBM2012LSURKZGKC
Hyper Red
P1-P3P4-P6

APHBM2012LSURKZGKC

Mfr. #:
Buy APHBM2012LSURKZGKC
Manufacturer:
Kingbright
Description:
Standard LEDs - SMD 2.0x1.2MM LOW CU RED/GREEN SMD
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet