MGJ6 Low Profile Series
5.7kVDC Isolated 6W Gate Drive SM DC/DC Converters
KDC_MGJ6C-LP.B01 Page 11 of 11
www.murata-ps.com/support
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice. © 2017 Murata Power Solutions, Inc.
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
This product is subject to the following operating requirements
and the
Life and Safety Critical Application Sales Policy:
Refer to:
http://www.murata-ps.com/requirements/
TAPE & REEL SPECIFICATIONS
REEL OUTLINE DIMENSIONS REEL PACKAGING DETAILS
TAPE OUTLINE DIMENSIONS
DIRECTION OF UNREELING
56.0±0.3 [2.205±0.012]
1.75 [0.069]
2.0±0.15 [0.079±0.006]
4.0 [0.157]
36.0 [1.417]
0.5 [0.020]
10.5±0.3 [0.413±0.010]
0.2±0.1 [0.008±0.004]
26.2±0.15 [1.031±0.006]
COVER TAPE
Ø2.0 [Ø0.079] MIN
3° MAX
52.4 [2.063]
Ø1.5
+0.1
-0.0
[
Ø0.059
+0.004
-0.000
]
3
°
M
A
X
40.4±0.2 [1.592±0.008]#
28.3±0.2 [1.115±0.008]#
Product Orientation
Pin 1, located nearest to
Reel Quantity: 7” - 23 or 13” - 92
Carrier tape pockets shown are illustrative only - Refer to carrier tape diagram for actual pocket details
62.4 [2.457] MAX #
Ø
13.5
12.8
[
Ø
0.531
0.504
]
1.5 [0.059]
MIN ##
Ø20.2 [Ø0.795]
MIN
Ø330 [13.000]
OR
Ø178 [7.000]
100 [3.937]
MIN
LEADER SECTION
400 [15.748] MIN
GOODS
ENCLOSURE
SECTION
TRAILER SECTION
160 [6.299] MIN
Tape & Reel specifications shall conform with current EIA-481 standard
Unless otherwise stated all dimensions in mm(inches) ±0.1mm (±0.004 Inches)
Controlling dimension is mm
Components shall be orientated within the carrier tape as indicated
# Measured on a plane 0.3mm above the bottom pocket
Tape & Reel specifications shall conform with current EIA-481 standard
Unless otherwise stated all dimensions in mm(inches)
Controlling dimension is mm
# Measured at hub
## Six equi-spaced slots on 180mm/7” reel
