E39-F1-31

E39
E39
5
E39-F1 Lens Kit
INSTALLING ACCESSORIES
This pair of lenses increases the sensing
distance of selected fiber-optic cables. To
install, screw each lens onto the threaded
tip of each sensing head.
Installation
Amplifer Sensing distance with fiber-optic cables
Part Fiber-optic E32-T11 E32-T11L E32-T11R E32-TC50 E32-TC200 E32- E32-TC500 E32- E32-T61
number cable TC200C TC1000
E3X-A w/ lens 1 m 1 m 1 m 1.5 m 1.5 m 800 mm 1.5 m 1 m 1.5 m
(3.3 ft) (3.3 ft) (3.3 ft) (4.9 ft) (4.9 ft) (31.5 in) (4.9 ft) (3.3 ft) (4.9 ft)
w/o lens 180 mm 350 mm 140 mm 200 mm 200 mm 150 mm 200 mm 500 mm 150 mm
(7.1 in) (13.8 in) (5.5 in) (7.9 in) (7.9 in) (5.9 in) (7.9 in) (19.7 in) (5.9 in)
E3X-DA-N w/ lens 4 m 4 m 4 m Contact 4 m Contact Contact Contact 4 m
(13.1 ft) (13.1 ft) (13.1 ft) Omron (13.1 ft) Omron Omron Omron (13.1 ft)
w/o lens 850 mm 1.66 m 670 mm Contact 950 mm Contact Contact Contact 570 mm
(33.5 in) (5.5 ft) (26.4 in) Omron (37.4 in) Omron Omron Omron (22.4 in)
E3X-F w/ lens 400 mm 550 mm Contact 670 mm 350 mm 1 m 450 mm
(15.8 in) (21.7 in) Omron (26.4 in) (13.8 in) (3.3 ft) (17.7 in)
w/o lens 80 mm 150 mm Contact 80 mm 60 mm 500 mm 60 mm
(3.2 in) (5.9 in) Omron (3.1 in) (2.4 in) (19.7 in) (2.4 in)
E3X-H w/ lens 2 m 2 m 2.1 m 3 m 3 m 1.6 m 3 m 1 m 3 m
(6.6 ft) (6.6 ft) (6.9 ft) (9.8 ft) (9.8 ft) (5.2 ft) (9.8 ft) (3.3 ft) (9.8 ft)
w/o lens 360 mm 700 mm 280 mm 400 mm 400 mm 300 mm 400 mm 500 mm 300 mm
(14.2 in) (27.6 in) (11.0 in) (15.7 in) (15.7 in) (11.8 in) (15.7 in) (19.7 in) (11.8 in)
E3X-NH w/ lens 2 m 2 m 2.1 m Contact 3 m 3.6 m Contact Contact 3 m
(6.6 ft) (6.6 ft) (6.9 ft) Omron (9.8 ft) (11.8 ft) Omron Omron (9.8 ft)
w/o lens 360 mm 700 mm 280 mm Contact 400 mm 300 mm Contact Contact 300 mm
(14.2 in) (27.6 in) (11.0 in) Omron (15.7 in) (11.8 in) Omron Omron (11.8 in)
E3X-NHB w/ lens 250 mm 250 mm Contact Contact 420 mm Contact Contact Contact Contact
(9.8 in) (9.8 in) Omron Omron (16.5 in) Omron Omron Omron Omron
w/o lens 90 mm 90 mm Contact Contact 55 mm Contact Contact Contact Contact
(3.5 in) (3.5 in) Omron Omron (2.2 in) Omron Omron Omron Omron
E3X-NM w/ lens 1.3 m 1.2 m 1.3 m Contact 2 m 800 mm Contact Contact 2 m
(4.3 ft) (3.9 ft) (4.3 ft) Omron (6.6 ft) (31.5 in) Omron Omron (6.6 ft)
w/o lens 240 mm 500 mm 180 mm Contact 270 mm 200 mm Contact Contact 180 mm
(9.4 in) (19.7 in) (7.1 in) Omron (10.6 in) (7.9 in) Omron Omron (7.1 in)
E3X-NT w/ lens 1.4 m 1.28 m 1.4 m Contact 2.1 m 850 mm Contact Contact 2.1 m
(4.6 ft) (4.2 ft) (4.6 ft) Omron (6.9 ft) (33.5 in) Omron Omron (6.9 ft)
w/o lens 260 mm 540 mm 200 mm Contact 290 mm 210 mm Contact Contact 190 mm
(10.2 in) (21.3 in) (7.9 in) Omron (11.4 in) (8.3 in) Omron Omron (7.5 in)
E3X-NV w/ lens 1.4 m 1.28 m 1.4 m Contact 2.1 m 850 mm Contact Contact 2.1 m
(4.6 ft) (4.2 ft) (4.6 ft) Omron (6.9 ft) (33.5 in) Omron Omron (6.9 ft)
w/o lens 260 mm 540 mm 200 mm Contact 290 mm 210 mm Contact Contact 190 mm
(10.2 in) (21.3 in) (7.9 in) Omron (11.4 in) (8.3 in) Omron Omron (7.5 in)
E3X-NVG w/ lens 120 mm 120 mm Contact Contact 190 mm 100 mm Contact Contact 130 mm
(4.7 in) (4.7 in) Omron Omron (7.5 in) (3.9 in) Omron Omron (5.1 in)
w/o lens 10 mm 40 mm Contact Contact 28 mm 18 mm Contact Contact 18 mm
(0.4 in) (1.6 in) Omron Omron (1.1 in) (0.7 in) Omron Omron (0.7 in)
E3X-VG w/ lens 120 mm 120 mm Contact 190 mm 190 mm 100 mm 1 m 130 mm
(4.7 in) (4.7 in) Omron (7.5 in) (7.5 in) (3.9 in) (3.3 ft) (5.1 in)
w/o lens 10 mm 40 mm Contact 28 mm 28 mm 18 mm 500 mm 18 mm
(0.4 in) (1.6 in) Omron (1.1 in) (1.1 in) (0.7 in) (19.7 in) (0.7 in)
E39 E39
6
E39-F2 Side View Attachment
These attachments provide 90° angle
viewing for through-beam cables. Use
then with E32-TC50, E32-TC200 and E32-
TC200C plastic filament cables and E32-
T61 glass filament cables. Screw each
piece onto the threaded tip of each
sensing head.
Note: This attachment does not increase sensing distance.
E39-F3 Diffuse Reflective Conversion Bracket
This bracket converts through-beam fiber
cables for diffuse reflective sensing. Use it
with E32-TC50, E32-TC200 and E32-
TC200C plastic filament cables. A set of
E39-F1 lenses are supplied with this
conversion bracket. To install, first remove
the mounting nuts from the fiber-optic
sensing heads. Then loosen the two set
screws on the bracket. Insert the sensing
ends through the bracket, then attach the
lenses. Tighten the two set screws to hold
the sensing heads in place. Mount the
bracket at the detection site, then loosen
the large center screw to adjust the angle.
When the angle that produces reliable
detection has been found, tighten the
screw to retain that angle.
E39-F3A Reflective Unit Lens (for E32-D32 Fiber)
When E39-F3A is attached to an E32-D32
fiber, adjust the focal point so that the
amplifier will not detect its own light
reflected from inside the E39-F3A.
Place the object to be detected or while
paper at the sensing distance, then adjust
the insertion depth of the fiber into the
E39-F3A so that the light spot is as small
as possible. Then fasten the sensing head
using the Allen head wrench supplied with
the E39-F3A.
In the example shown,
A = The focus is farther than the E39-F3A
B = The focus is closer than the E39-F3A.
E39-F5 Diffuse Reflective Side View Conversion Block
This reflective side view block may be
used with E32-TC200A plastic filament
fiber-optic cable only. It provides a 2 cm
(0.79 in) sensing distance. To install, first
remove mounting nuts and washers from
fiber-optic sensing head. Then, screw the
threaded heads as far as they will go onto
the mounting holes on the narrow side of
the block.
E39
E39
Protective Stainless Steel Tubes
Insert the fiber into the protective armor
tube from the head connector side
(threaded) of the tube.
Push the fiber into the armor tube. The
tube should be straight so that the fiber is
not twisted when inserted. Then turn the
end cap of the tube.
Secure the tube on a suitable place with
the attached nut.
Use the attached saddle to secure the end
cap of the tube. To secure the tube at a
position other than at the end cap, apply
tape to the tube so that the portion
becomes thicker in diameter
Chemical Resistance
Do NOT use a fiber-optic cable and
amplifier in an atmosphere containing
organic solvents such as paint thinner
vapors.
OMRON ELECTRONICS LLC OMRON CANADA, INC.
One East Commerce Drive 885 Milner Avenue
Schaumburg, IL 60173 Scarborough, Ontario M1B 5V8
1-800-55-OMRON 416-286-6465
Cat. No. CEDSAX4 11/01 Specifications subject to change without notice. Printed in the U.S.A.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.omron.com/oei
Canada - http://www.omron.com/oci

E39-F1-31

Mfr. #:
Manufacturer:
Omron Automation and Safety
Description:
Photoelectric Sensors Side View Lens
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet