FP-1310-5I-50SMF-FCAPC

FEATURES:
Wide operating temperature
(-40°C to 85°C)
Stable threshold current for easy
transmitter control (T
0
~ 80K)
1310 nm typical emission
wavelength FP-LDs
Pigtailed package
High-speed modulation
capability (Up to 5Gb/s)
Excellent reliability
Ultra-low gradual
wear-out rates
<1% failures in 20 yrs at 55C
APPLICATION
Source for high-speed
data-communication and
telecommunication links
SONET, Fiber-channel,
Giag-bit Ethernet, FTTX
CATV / Satellite and other
analogue markets
1310 NM FABRY-PEROT (FP)
LASER DIODE
PIGTAILED PACKAGE
FP-1310-5I-XXX
Preliminary
DATA
SHEET
The FP-1310-5I-xxx is an MOCVD grown InAlGaAs ridge laser diode with
emission wave-length of 1310 nm and standard continuous light output of 5
mW per facet. These lasers provide stable, single transverse mode oscillation.
These are hermetically sealed devices with an integrated monitor photodiode
to monitor the optical output.
The TO-56 laser can is mounted inside a metal coaxial package which is then
pigtailed with a singlemode fiber and terminated with a fiber connector. The
pigtail comes in a choice of 50cm or 100cm lengths as standard, terminated
with either FC or SC connectors with an APC or UPC polish.
Suitable as a light source for data-com and telecom applications with data
rates up to 5 Gb/s.
Part Number Description
FP-1310-5I-50SMF-FCUPC
1310 nm Fabry-Perot (FP) Laser Diode, 50cm singlemode
pigtailed package, FC UPC connector.
FP-1310-5I-50SMF-FCAPC
1310 nm Fabry-Perot (FP) Laser Diode, 50cm singlemode
pigtailed package, FC APC connector.
FP-1310-5I-100SMF-SCUPC
1310 nm Fabry-Perot (FP) Laser Diode, 100cm singlemode
pigtailed package, SC UPC connector.
FP-1310-5I-100SMF-SCAPC
1310 nm Fabry-Perot (FP) Laser Diode, 100cm singlemode
pigtailed package, SC APC connector.
.
Other fiber lengths and connector options available on request.
FP-1310-5I-XXX 1310 NM FABRY-PEROT (FP) LASER DIODE
NOTICE: Stresses greater than those listed under Absolute
Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation
of the device at these or any other conditions above those
indicated in the operations section for extended periods of
time may affect reliability.
NOTICE: The inherent design of this component causes it
to be sensitive to electrostatic discharge (ESD). To prevent
ESD-induced damage and/or degradation to equipment, take
normal ESD precautions when handling this product
ABSOLUTE MAXIMUM RATINGS
Symbol Parameter Conditions Rating
Unit
P
O
Output power CW 10
mW
V
R
LD
Reverse voltage (laser diode) - 2
V
V
R
PD
Reverse voltage (monitor photodiode) - 10
V
I
F
PD
Forward current (photodiode) - 1
mA
T
c
Operation temperature
- -40 to +85
°C
T
stg
Storage temperature - -40 to +100
°C
- ESD exposure level (human body model) - 200
V
FP-1310-5I-XXX
ELECTRICAL-OPTICAL CHARACTERISTICS
Symbol Parameter Test Conditions Minimum Typical Maximum Unit
P
oc
Output power - pigtail end
CW, I
F
= 32mA 2.5 mW
I
th
Threshold current CW 3 9 15 mA
I
thH
Threshold current
at 85°C
CW, T
c
=85°C 21 30 mA
T
0
Temperature dependence of
threshold current
- 80 - K
I
op
Operating current For P
O
= 2mW (CW) -
32
mA
V
op
Operating voltage CW Voltage at I
op
1.15 1.4
V
R
op
Differential series resistance
(laser diode)
CW dV/dI at T = 25°C
between 15 mA and 25 mA
4 7 12
Ω
SE Slope efficiency (fiber coupled)
0.1
W/A
SER SE Ratio SE @ 85°C / SE @ 25°C 0.6 0.8
SE @ 40°C / SE @ 25°C 1.4
ΔSET
Slope efficiency temperature
coefficient
-0.35 -0.65 %/°C
λ
c
Lasing wavelength 1290 1310 1330 nm
Δλ
Spectral width under
modulation
PRBS 2^7-1 ER =10 dB; Ib =
1.8*I
th
; RMS (sigma)
- 1.5 2.75 nm
dλc/dT
Temperature dependence of
lasing wavelength
0.40 0.45 0.55 nm/K
t
r
Rise time 20% - 80% ; T
c
= 85°C;
ER = 10 dB; Ib = 1.8*I
th
- - 140 ps
t
f
Fall time 20% - 80% ; T
c
= 85°C;
ER =10 dB; Ib = 1.8*I
th
- - 140 ps
RIN Relative Intensity Noise CW, 0.95 to 5.45GHz, -20dBm
back reflection in worst case
polarization
-125 dB/Hz
TOIP Third order intercept point P
O
=2mW, F=5.45 to 5.452GHz,
85°C
15 dB
f
R
Relaxation oscillation
frequency
T
c
= 85°C; I = I
th
+36 mA 5 5.5 - GHz
C
d
Capacitance for monitor
photodiode
- 5 50 pF
I
mon
Monitor photodiode current
30 130
1000
μA
Δ
TRACK
Tracking error -1.5 - +1.5 dB
I
m0
Dark current for Monitor
photodiode
- - 0.1
μA
Unless otherwise stated, all parameters are at T
CASE
= 25°C and referenced to pigtail power.
Iop = 32mA

FP-1310-5I-50SMF-FCAPC

Mfr. #:
Manufacturer:
Finisar Corporation
Description:
Laser Diodes 1310NM FP TOSA 5GBPS PIGTAILED 50CM
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet