www.panduit.com
Material:
Metal components – cold rolled steel, powder coated
Fabric components – vinyl laminate
Standards:
Suitable for 19.00" width (482.6mm) vertical mounting rails that meet
CEA-310-E standards; fabric material meets ASTM D6413
Compatibility:
Solution suitable for 0.38" (9.5mm) square or #10 (M5) and #12 (M6)
round tapped holes typically found in EIA vertical mounting rails
Temperature range:
0°C to 50°C (32°F to 122°F) continuous; 70°C (158°F) intermittent
Electrostatic
Surface resistivity is 3.0 x 10
4
ohms per unit square
dissipative (ESD):
RoHS compliance:
Compliant
key features and benefits
applications
technical information
specifications
The full length blanking shade shall blank out as few as four rack units, or
as many as 45 consecutive rack units. The upper housing of the full length
blanking shade shall contain a rolled fabric material secured to a spring
roller and be designed for installation in the top rack units of the rack or
cabinet. The bottom handle of the adjustable shade can then be secured
to the appropriate rack unit using sliding latches to blank out the desired
number of rack units. Hand tools shall not be required for installation.
Spring roller with retractable
Allows fabric to be retracted and stored within its
fabric material
own housing; reduces space required to store
blanking products
Impermeable fabric
Minimizes bypass airflow through consecutive open rack
units; separates the hot aisle from the cold aisle to help
decrease energy costs
Component installation behind
Reduces the chance of hot exhaust air from re-circulating
vertical mounting rails
to the front (intake) of the network equipment, preventing
overheating of active network equipment
Thumb screw installation for
Allows for efficient installation of the main housing; thumb
top housing
screws eliminate the need for tools and also provides a
very secure means of mounting
Latch design for bottom pull
Allows for quick and easy deployment and retraction of the
blanking material
ESD materials with
Reduce the chance of corrupting network equipment with
grounding capabilities
electrical shock by providing a path to ground
Variable floating fasteners/
Allow for variability in horizontal spacing of vertical
locator pins
mounting rails
Removable bullet nose fastener
Allows installation of the same part number on vertical
mounting rails with either square or round tapped holes
Shade locator guide in housing
Forces fabric material to contact vertical mounting rail to
improve sealing capabilities
The full length blanking shade is designed to
provide a blanking solution for racks and
cabinets that have a large number of
consecutive open rack units. The full length
blanking shade is designed to be adjustable so
when new cabinets are put in place, or when
equipment is being serviced, the shade can be
deployed to easily and efficiently blank
out unused rack units. An impermeable fabric
material coiled on a spring roller can be
deployed or retracted to accommodate the
required open rack units. A latch design, on
the bottom handle, allows easy installation on
the vertical mounting rails of most standard
racks and cabinets. The blanking shade
provides an easy solution to reduce bypass
air; thereby, decreasing energy costs.
Full Length Blanking Shade
SPECIFICATION SHEET
Full Length Blanking Shade
Full length blanking
shade to blank out 4 – 45
consecutive rack units:
FLBSIM-Y
Tool-Less Blanking Panels
1 RU x 19.00" (482.6mm)
width for 3/8" square
cage nut holes:
TLBP1S-V
2 RU x 19.00" (482.6mm)
width for 3/8" square
cage nut holes:
TLBP2S-V
1 RU x 19.00" (482.6mm)
width for round
tapped holes:
TLBP1R-V
2 RU x 19.00" (482.6mm)
width for round
tapped holes:
TLBP2R-V
Cool Boot
®
Grommets
(New Installations)
6" x 8" (152 x 203mm):
RFG6X8Y
8" x 8" (203 x 203mm):
RFG8X8Y
10" x 8" (254 x 203mm):
RFG10X8Y
12" x 8" (305 x 203mm):
RFG12X8Y
12" x 4" (305 x 102mm):
RFG12X4Y
4.50" diameter
(114.3mm):
RFG3DY
6.50" diameter
(165.1mm):
RFG5DY
Cool Boot
®
Grommets
(Retrofit Applications)
6" x 8" (152 x 203mm):
RFG6X8SMY
8" x 8" (203 x 203mm):
RFG8X8SMY
10" x 8" (254 x 203mm):
RFG10X8SMY
12" x 8" (305 x 203mm):
RFG12X8SMY
12" x 4" (305 x 102mm):
RFG12X4SMY
4.50" diameter
(114.3mm):
RFG3DSMY
6.50" diameter
(165.1mm):
RFG5DSMY
Net Access
™
Cabinets
45 RU switch cabinet
with side panels, front
and rear doors:
CN1
45 RU switch cabinet
with front and
rear doors:
CN2
45 RU switch cabinet:
CN3
45 RU server cabinet
with side panels, front
and rear doors:
CS1
45 RU server cabinet
with front and
rear doors:
CS2
45 RU server cabinet:
CS3
Net Access
™
Vertical Exhaust
System Kits
Vertical extender:
CVED32
Variable duct:
42 – 70"
(1068 – 1778mm):
CVED32VE
Variable short duct:
20 – 36"
(508 – 914mm):
CVED32VES
