TPSMP6.8A thru TPSMP43A
www.vishay.com
Vishay General Semiconductor
Revision: 08-Nov-16
1
Document Number: 88471
For technical questions within your region: DiodesAmericas@vishay.com
, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
High Power Density Surface Mount PAR
®
Transient Voltage Suppressors
TYPICAL APPLICATIONS
Protection for ICs, drive transistors, signal lines of sensor
units, and electronic units in consumer, computer,
industrial, and automotive applications.
FEATURES
• Junction passivation optimized design
passivated anisotropic rectifier technology
•T
J
= 185 °C capability suitable for high reliability
and automotive requirement
• Very low profile - typical height of 1.0 mm
• Ideal for automated placement
• Uni-direction only
• Excellent clamping capability
• Low incremental surge resistance
• Very fast response time
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
MECHANICAL DATA
Case: DO-220AA (SMP)
Molding compound meets UL 94 V-0 flammability rating
Base P/NHM3_X - halogen-free, RoHS-compliant and
AEC-Q101 qualified (“X” denotes revision code e.g. A, B, ...)
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
HM3 suffix meets JESD 201 class 2 whisker test
Polarity: color band denotes cathode end
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above T
A
= 25 °C per fig. 2
(2)
Mounted on PCB with 5.0 mm x 5.0 mm copper pads attached to each terminal
(3)
Pulse test: 300 μs pulse width, 1 % duty cycle
PRIMARY CHARACTERISTICS
V
BR
6.8 V to 43 V
V
WM
5.8 V to 36.8 V
P
PPM
(for V
BR
6.8 V) 250 W
P
PPM
(for V
BR
7.5 V to 12 V) 300 W
P
PPM
(for V
BR
13 V to 43 V) 400 W
P
D
2.5 W
I
FSM
40 A
T
J
max. 185 °C
Polarity Uni-directional
Package DO-220AA (SMP)
DO-220AA (SMP)
eSMP
®
Series
MAXIMUM RATINGS (T
A
= 25 °C, unless otherwise noted)
PARAMETER SYMBOL VALUE UNIT
Peak power dissipation with a 10/1000 μs waveform (fig. 1 and 3)
(1)(2)
P
PPM
See table next page W
Peak power pulse current with a 10/1000 μs waveform (fig. 1)
(1)
I
PPM
See table next page A
Power dissipation on infinite heatsink, T
A
= 75 °C P
D
2.5 W
Peak forward surge current 10 ms single half sine-wave
superimposed on rated load
I
FSM
40 A
Maximum instantaneous forward voltage at 25 A
(3)
V
F
2.5 V
Operating junction and storage temperature range T
J
, T
STG
-65 to +185 °C