Tape and Packing
1. Components description (Only for reference / Unit : mm)
2. Taping dimensions (Unit : mm)
3. Tape and packing specification
3-1. Direction of tape winding
Cathode mark comes to feeding hole side. The direction shall be one in a reel.
3-2. Cumulative pitch tolerance
The cumulative pitch tolerance of the mold for producing the carrier tape shall be within ±0.2mm
per 10pitches.
3-3. The minimum radius to bend the carrier tape
Carrier tape shall be flexible enough to protect from no component and damage under a minimum
radius of 15mm. However it shall be defined onl
inside of carrier tape.
3-4. The material of carrier tape
Polystyrene.
3-5. Failure Rate
TE-17Diode Product Package SOD-323FL(UMD2) Type
Continuous missing 0%
Except leader and trail portion
Discontinuous missing
Max.0.1%/reel
Incidence Remark
0.3
0.1
1.7
2.5
1.25
0.7
________________________________________________________
www.rohm.com
©2016 ROHM Co., Ltd. All rights reserved
1/4
2017.11 - Rev.002