PROTEKTIVE PAK
13520 MONTE VISTA AVENUE, CHINO, CA 91710
PHONE (909) 627-2578, FAX (909) 363-7331
ProtektivePak.com
DRAWING NUMBER
37500
DATE:
September
2011
STORAGE CONTAINERS
© 2011 DESCO INDUSTRIES INC.
Employee Owned
SPECIFICATIONS
Properties Typical Values Test Procedures/Method
Electrostatic Decay 0.01 seconds at 72°F and 11.8% R.H. FED-STD-101, Method 4046
Surface Resistance 10E6 - 10E8 ohms/sq. after 11 days at 68°F and 12% R.H.
for surface. 10E3 - 10E4 ohms/sq. for buried shielding layer ASTM D257
Surface Resistance, Low R.H. Cut-off 4% R.H. Rockwell International Test Report of December 20, 1991
High-Voltage Discharge Resistance Failure rate 0/5 (no oxide damage in five consecutive tests) Rockwell International Test Report of December 20, 1991
Static Shielding 99.9% attenuation at 10kV; 99.6% attenuation at 30kV EIA 541, appendix E, capacitive probe test
Charged Device Model (CDM) Safety RTG >10E7 ohms at 86% R.H. or less Rockwell International Test Report of December 20, 1991
Current-Carrying Hazard 10E3 mA at 110V; 10E3 mA at 220V ESD from A to Z
Corrosivity Contains 1-3 ppm reducible sulfur FED-STD-101, Method 3005 for reducible sulfur
Antistat Transfer No transfer Rockwell International Test Report of January 8, 1992
Water & Isopropyl Alcohol Extraction Surface resistance 10E8 - 10E9 ohms/square at 74°F Rockwell International Test Report of January 8, 1992
Tests for Antistat Permanence and 36% R.H.
Sloughing Test Negligible surface damage at 10 cycles and <5% of surface ASTM D4060 at 70 rpm with CS-17 abrasive-coated
damage at 200 cycles in Taber Abrasion Test. wheels and 1000 grams load
No conductive particles abrased from surface Rockwell International Test Report of January 8, 1992
Recyclability Complete recyclability of package Rockwell International Test Report of January 8, 1992
Biodegradability Biodegradation in or on moist soil
Volume Conductivity Conductivity from wall to wall as well as across surface Rockwell International Test Report of January 8, 1992
to assure permanence of the antistatic property
Shelf Life Indefinite
Made in the
United States of America
Features
• Provides ESD and physical protection for ESD sensitive compnonets; with lid
in place, shielding creates “Faraday Cage” restricting electrostatic charges to
exterior to ship or store ESD sensitive items outside an ESD protected area
• Available with optional lid, steel reinforcing frame for additional strength and
durability, ESD handles, and permanently static dissipative bottom foam pad
for cushioning
• Impregnated corrugated material; greater durability than coated or printed
material
• Constructed with double sides, double (boxes under 6” deep) or triple (boxes
over 6” deep) ends, and single (boxes under 6” deep) or double (boxes over
6” deep) thickness bottom for greater durability
• Static dissiapative surface of 10E6 - 10E8 ohms - minimizing the potential of
rapid discharge or sparking
• Buried shielding layer minimizing the potential of sloughing and rub-off
contamination
• Made from 100% recycled material, and is 100% recyclable
• No tooling cost
• Easy assebmly without the need for tape, glue, or staples
• Reusable, ensuring low cost
See reverse side for
available sizes.
- - - - - - - - - - - - -
W
- - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - -
D
L