OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HMC565LC5TR

P1-P3P4-P6
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
LOW NOISE AMPLIFIERS - SMT
4
HMC565LC5
v03.0514
GaAs SMT PHEMT LOW NOISE
AMPLIFIER, 6 - 20 GHz
Outline Drawing
Absolute Maximum Ratings
Drain Bias Voltage (Vdd1, Vdd2, Vdd3) +3.5 Vdc
RF Input Power (RFIN)(Vdd = +3.0 Vdc) 0 dBm
Channel Temperature 175 °C
Continuous Pdiss (T= 85 °C)
(derate 8.5 mW/°C above 85 °C)
0.753 W
Thermal Resistance
(channel to ground paddle)
119. 5 ° C/ W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ESD Sensitivity (HBM) Class 1A
Vdd (V) Idd (mA)
+2.5 51
+3.0 53
+3.5 56
Typical Supply Current vs. Vdd
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES
GOLD OVER 50 MICROINCHES MINIMUM NICKEL
3. DIMENSIONS ARE IN INCHES [MILLIMETERS]
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Package Information
Part Number Package Body Material Lead Finish MSL Rating Package Marking
[2]
HMC565LC5 Alumina, White Gold over Nickel
MSL3
[1]
H565
XXXX
[1] Max peak reow temperature of 260 °C
[2] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
LOW NOISE AMPLIFIERS - SMT
5
HMC565LC5
v03.0514
GaAs SMT PHEMT LOW NOISE
AMPLIFIER, 6 - 20 GHz
Pin Descriptions
Pin Number Function Description Interface Schematic
1, 2, 6 - 19,
23 - 25, 27,
29, 31, 32
N/C
This pin may be connected to RF/DC ground.
Performance will not be affected.
3, 5, 20, 22 GND
These pins and package bottom must be
connected to RF/DC ground.
4 RFIN
This pin is AC coupled
and matched to 50 Ohms.
21 RFOUT
This pin is AC coupled
and matched to 50 Ohms.
30, 28, 26 Vdd1, 2, 3
Power Supply Voltage for the amplier. External bypass
capacitors of 100 pF and 2.2 µF are required.
Application Circuit
Component Value
C1, C2, C3 100 pF
C4, C5, C6 2.2 µF
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
LOW NOISE AMPLIFIERS - SMT
6
HMC565LC5
v03.0514
GaAs SMT PHEMT LOW NOISE
AMPLIFIER, 6 - 20 GHz
Evaluation PCB
List of Materials for Evaluation PCB 110431
[1]
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appro-
priate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
Item Description
J1 - J2 PCB Mount K Connector
J3 2 mm DC Header
C1 - C3 100 pF Capacitor, 0402 Pkg.
C4 - C6 2.2 µF Capacitor, Tantalum
U1 HMC565LC5 Amplier
PCB
[2]
109001 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
P1-P3P4-P6

HMC565LC5TR

Mfr. #:
Buy HMC565LC5TR
Manufacturer:
Analog Devices / Hittite
Description:
RF Amplifier lo Noise amp SMT, 6 - 20 GHz
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet