ADG741/ADG742
Rev. A | Page 5 of 12
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted.
Table 3.
Parameters Ratings
V
DD
to GND −0.3 V to +7 V
Analog, Digital Inputs
1
−0.3 V to V
DD
+ 0.3 V
or 30 mA, Whichever
Occurs First
Continuous Current, S or D 30 mA
Peak Current, S or D (Pulsed at 1ms,
10% Duty Cycle Max)
100 mA
Operating Temperature Range
Industrial (B Version) −40°C to +85°C
Storage Temperature Range −65°C to +150°C
Junction Temperature 150°C
SC70 Package
θ
JA
Thermal Impedance 494.8°C/W
θ
JC
Thermal Impedance 120°C/W
Lead Temperature, Soldering
Vapor Phase (60 sec) 215°C
Infrared (15 sec) 220°C
ESD 1.5 kV
1
Overvoltages at IN, S, or D will be clamped by internal diodes. Current
should be limited to the maximum ratings given.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those listed in the operational sections
of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability. Only one absolute maximum rating may be
applied at any one time.
Table 4. Truth Table
ADG741 In ADG742 In Switch Condition
0 1 OFF
1 0 ON
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degrada-
tion or loss of functionality.
