Not Recommended for New Design
AP1515
150KHz, 1.5A PWM Buck DC/DC Converter
This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of
this product. No rights under any patent accompany the sale of the product.
Rev.1.1 Oct 24, 2005
1/9
Features
- Output voltage: 3.3V and adjustable output
version
- Adjustable version output voltage range, 1.23V to
18V+
4%
- 150KHz +
15% fixed switching frequency
- Voltage mode non-synchronous PWM control
- Thermal-shutdown and current-limit protection
- Operating voltage can be up to 22V
- Output load current: 1.5A
- SIP-4L, SOP-8 Pb-Free package
- Low power standby mode
- Built-in switching transistor on chip
- Very Low Cost
Applications
- Simple High-efficiency step-down regulator
- On-card switching regulators
- Positive to negative converter
General Description
The AP1515 series are monolithic IC designed for a
step-down DC/DC converter, and own the ability of
driving a 1.5A load without additional transistor
component. Due to reducing the number of external
component, the board space can be saved easily.
The external shutdown function can be controlled
by logic level and then come into standby mode.
The internal compensation makes feedback control
have good line and load regulation without external
design. Regarding protected function, thermal
shutdown is to prevent over temperature operating
from damage, and current limit is against over
current operating of the output switch. If current
limit function occurred and V
FB
is down to 0.5V
below, the switching frequency will be reduced.
The AP1515 series operates at a switching
frequency of 150KHz thus allowing smaller sized
filter components than what would be needed with
lower frequency switching regulators. Other
features include a guaranteed +
4% tolerance on
output voltage under specified input voltage and
output load conditions, and +
15% on the oscillator
frequency. The output version included fixed 3.3V
and an adjustable type.
Pin Assignments
1515
12 43
1 : V
IN
2 : Output
3 : FB
4 : GND
(Front View)
SIP-4L
Output
FB
SD
GND
GND
GND
GND
1
3
2
4
8
6
7
5
SOP-8L
(Top View)
V
IN
Pin Descriptions
Name Description
V
IN
Operating voltage input
Output Switching output
FB Output voltage feedback control
SD ON/OFF Shutdown
GND Ground
