For further information contact your local STMicroelectronics sales
office
STUSB1600A Type-C™ controller evaluation board
Features
1 full-featured USB Type-C port
(Source/Sink/Dual-role)
STUSB1600A Type-C controller compliant
with USB Type-C standard rel. 1.2 + ECR
V
BUS
power switches and discharge path
V
CONN
support (programmable current limit
up to 600 mA)
Dead Battery mode support
Compatible with NUCLEO-F072RB board for
configuration and debug interface
Description
The STEVAL-CCC002V1 evaluation board lets
you prototype a full-featured 5 V USB Type-C
port with STUSB1600A, which can be configured
in a source, sink or dual power role.
Both source and sink V
BUS
power paths are
enabled directly by the STUSB1600A according
to the port power role configuration and the
attached device.
Jumpers are available to evaluate different power
supply configurations for the STUSB1600A,
based on the targeted application.
The various LEDs indicate the operating status of
the STUSB1600A and USB Type-C port.
The USB Type-C port is pre-configured for 1.5 A
USB Type-C current, Dual-role port and Dead
Battery mode enabled.