Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Plastic Film Capacitors
1 2 3 4 5 6 7 8 9 11 12
E C Q U3A
Product code Dielectric &
construction
SuffixSuffix
Rated voltage Capacitance
Cap. Tol.
10
M ±20 %
MG
Code
Blank
A
Lead Form
Straight
Cut lead
●
Equipped with a safety mechanism
●
Flame-retardant plastic case and non combustible resin
●
RoHS directive compliant
●
Interference suppressors
✽
It is certifi ed as type ECQUG in the following approval.
Features
Metallized Polypropylene
Film Capacitor
Type : ECQUG
[
Class X1
]
Category temperature range −40 °C to +100 °C
Rated voltage 300 V.AC
Rated capacitance 0.010 F to 1.0 F (E6)
Capacitance tolerance ±20 % (M)
Dissipation factor (tan d) tan
d
<
1.0 % (20 °C, 1 kHz )
Withstand voltage
Between terminals : 575 V.AC, 1768 V.DC, 60 s
Between terminals to enclosure : 2100 V.AC, 60 s
Insulation resistance (IR)
C < 0.33 F : IR > 15000 MΩ (20 °C, 100 V.DC, 60 s)
C > 0.33 F : IR > 5000 MΩ F (20 °C, 100 V.DC, 60 s)
IR > 2000 MΩ (20 °C, 500 V.DC, 60 s)
Approval Class Certifi cation organization
UL UL60384-14 Class X1 UL
CSA CAN/CSA E60384-14 Class X1 CSA
Europe EN60384-14 Class X1
NEMKO
International IEC60384-14 Class X1
✽
Use of this capacitor is limited to AC voltage (50 Hz or 60 Hz sine wave).
✽
When applying this capacitor to European and American safety standards, please use type designation and rating such as ECQUG, 0.1 F.
✽
Approval number (File No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the latest file No..
✽
European standards marking are NEMKO only. But, there are no problem using this capacitor in a device which will get approvals from certification bodies
in Europe, VDE, FIMKO, SEMKO, DEMKO, and SEV etc. except VDE and FIMKO.
In accordance with UL/CSA
and European safety regulation class X1
Recommended applications
Explanation of part number
Applicable standard
Speci cations
Feb. 201601