DO NOT
SCALE FROM
THIS PRINT
No. OF POSITIONS
-02 THRU -50
BODY SPEC
-S: SINGLE ROW
(USE CLP-50-S)
LEAD STYLE SPEC
-02: SURFACE MOUNT
(USE C-106-01-X)
OPTION
-TR: TAPE AND REEL
CLP-1XX-XX-XX-S-XX
PLATING SPEC
(NO OF POS X .0500[1.270])+.017[0.43]
±.005[0.13]
.025
REF
0.64
.0160
x .0050[.127] REF
0.406
(NO OF POS X .0500[1.270]) - .0500[1.270] REF
1
MAX SWAY
(ANY DIRECTION)
C-106-01-X
.0835
REF
2.121
"A"
"A"
CLP-50-S
.0890 2.261
(MEASURE AT BEND)
.119
±.010
3.02
±0.25
(SEE NOTE 3)
+3
-3
SECTION "A"-"A"
.004[0.10
POS. 2-25
.006[0.15
POS. 26-50
C1
C2
C3
C4
C5
C6
-G: 10µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
01
02
03
TUBE PACKAGING
SCALE 3:1
TUBE: PT-1-24-02-65
PLUG: TP-30
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
LOW PROFILE .050 C.L. SINGLE ROW ASM.
BY:
CLP-1XX-XX-XX-S-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
06/07/1995
1
1
SHEET SCALE: 6:1
F:\DWG\MISC\MKTG\CLP-1XX-XX-XX-S-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
NOTES:
1.
C
PREPRESENTS A CRITICAL DIMENSION FOR STATISTICAL PROCESS CONTROL.
2. MINIMUM PUSHOUT FORCE: .5 LB.
3. SHEAR TAILS TO DIMENSIONS SHOWN.
4. PARTS TO BE SYMMETRICAL ABOUT
C
L
.
5.
WILL LOSE ONE POSITION PER CUT TO OBTAIN ODD POSITION PARTS.
WILL LOSE TWO POSITIONS PER CUT TO OBTAIN EVEN POSITION PARTS.
6. TUBE PACKAGE POSITIONS 5 THROUGH 50 ONLY. POSITIONS 2 THRU4
ARE TO BE LAYER PACKAGED.
7. .002[0.05] MAX BURR.
8. CUT FLASH TO BE .010[0.25] MAX WITH NO FLASH ALLOWED IN HOLES
OR EXTENDING BELOW LEADS.
INSULATOR: LCP, UL 94 VO, COLOR: BLACK
CONTACT: PHOS BRONZE
REVISION X
