IHLM-2525CZ-07
www.vishay.com
Vishay Dale
Revision: 06-Dec-16
1
Document Number: 34186
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Low Profile, Power Inductors - DC Resistance Tolerance 5 % -
Special Molding
Manufactured under one or more of the following:
US Patents; 6,198,375/6,204,744/6,449,829/6,460,244.
Several foreign patents, and other patents pending.
Notes
(1)
All test data is referenced to 25 °C ambient
(2)
Operating temperature range -55 °C to +125 °C
(3)
DC current (A) that will cause an approximate T of 40 °C
(4)
DC current (A) that will cause L
0
to drop approximately 20 %
(5)
The part temperature (ambient + temp. rise) should not exceed
125 °C under worst case operating conditions. Circuit design,
component placement, PWB trace size and thickness, airflow
and other cooling provisions all affect the part temperature. Part
temperature should be verified in the end application.
FEATURES
• Lowest molded height (3.0 mm) in this package
footprint
• Shielded construction
• Frequency range up to 5.0 MHz
• Lowest DCR/μH, in this package size
• Handles high transient current spikes without saturation
• Ultra low buzz noise, due to composite construction
• Encapsulated body offers improved environmental
protection and moisture resistance
• Higher dielectric withstanding voltage vs. IHLP
• Flame retardant encapsulant (UL 94 V-0)
• Corrosion resistant package
• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
APPLICATIONS
• Tolerance DCR for current sense applications
• Improved current balance in phased power supplies
• Improved thermal management
•
PDA/notebook/desktop/server and battery powered devices
• High current, low profile POL converters
• DC/DC converters in distributed power systems
• DC/DC converter for Field Programmable Gate Array
(FPGA)
STANDARD ELECTRICAL SPECIFICATIONS
L
0
INDUCTANCE
± 20 % AT 100 kHz,
0.25 V, 0 A
(μH)
DCR
± 5 %
AT 25 °C
(m)
HEAT
RATING
CURRENT
DC TYP.
(A)
(3)
SATURATION
CURRENT
DC TYP.
(A)
(4)
0.10 1.37 32.5 60
0.15 1.85 26 52
0.20 2.34 24 41
0.33 3.20 20 30
0.47 3.86 17.5 26
0.68 5.20 15.5 25
0.82 7.41 13 24
1.0 8.44 11 22
1.5 14.50 9 18
2.2 17.73 8 14
3.3 28.21 6 13.5
4.7 37.11 5.5 10
8.2 61.47 4 7.5
10 97.71 3 7.0
DIMENSIONS in inches [millimeters]
0.255 ± 0.010
[6.47 ± 0.254]
0.270 ± 0.015
[6.86 ± 0.381]
0.050 ± 0.012
[1.27 ± 0.305]
0.118 [3.0] Max.
Typical Pad Layout (Min.)
0.146
[3.71]
0.290
[7.37]
0.135
[3.43]
0.125 ± 0.01
[3.18 ± 0.3]
DESCRIPTION
IHLM-2525CZ-07 1.0 μH ± 20 % ER e3
MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC
®
LEAD (Pb)-FREE STANDARD
GLOBAL PART NUMBER
IHLM2525CZER1R0M07
PRODUCT FAMILY SIZE
PACKAGE
CODE
INDUCTANCE
VALUE
TOL. SERIES
